The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

vinum (4)
  • >> vinum (4) ( FreeBSD man: Специальные файлы /dev/* )
  • vinum (4) ( Русские man: Специальные файлы /dev/* )
  • vinum (8) ( Русские man: Команды системного администрирования )

  • BSD mandoc
     

    NAME

    
    
    vinum
    
     - Logical Volume Manager
    
     
    

    SYNOPSIS

    device vinum  

    DESCRIPTION

    is a logical volume manager inspired by, but not derived from, the Veritas Volume Manager. It provides the following features:

     

    KERNEL CONFIGURATION

    is currently supplied as a KLD module, and does not require configuration. As with other KLDs, it is absolutely necessary to match the KLD to the version of the operating system. Failure to do so will cause to issue an error message and terminate.

    It is possible to configure in the kernel, but this is not recommended. To do so, add this line to the kernel configuration file:

     

    Debug Options

    The current version of , both the kernel module and the user program gvinum(8), include significant debugging support. It is not recommended to remove this support at the moment, but if you do you must remove it from both the kernel and the user components. To do this, edit the files /usr/src/sbin/vinum/Makefile and /usr/src/sys/modules/vinum/Makefile and edit the CFLAGS variable to remove the -DVINUMDEBUG option. If you have configured into the kernel, either specify the line

    in the kernel configuration file or remove the -DVINUMDEBUG option from /usr/src/sbin/vinum/Makefile as described above.

    If the VINUMDEBUG variables do not match, gvinum(8) will fail with a message explaining the problem and what to do to correct it.  

    Other Options

    options VINUM_AUTOSTART

    Make automatically scan all available disks at attach time. This is a deprecated way that is primarily intended for environments that do not want to rely on kernel environment variables set by loader(8).

    was previously available in two versions: a freely available version which did not contain RAID-5 functionality, and a full version including RAID-5 functionality, which was available only from Cybernet Systems Inc. The present version of includes the RAID-5 functionality.  

    RUNNING VINUM

    is part of the base Fx system. It does not require installation. To start it, start the gvinum(8) program, which will load the KLD if it is not already present. Before using , it must be configured. See gvinum(8) for information on how to create a configuration.

    Normally, you start a configured version of at boot time. Set the variable start_vinum in /etc/rc.conf to ``YES '' to start at boot time. (See rc.conf5 for more details.)

    If is loaded as a KLD (the recommended way), the vinum stop command will unload it (see gvinum(8)). You can also do this with the kldunload(8) command.

    The KLD can only be unloaded when idle, in other words when no volumes are mounted and no other instances of the gvinum(8) program are active. Unloading the KLD does not harm the data in the volumes.  

    Configuring and Starting Objects

    Use the gvinum(8) utility to configure and start objects.  

    AUTOMATIC STARTUP

    The subsystem can be automatically started at attach time. There are two kernel environment variables that can be set in loader.conf5 to accomplish this.

    vinum.autostart
    If this variable is set (to any value), the attach function will attempt to scan all available disks for valid configuration records. This is the preferred way if automatic startup is desired.

    Example:

    vinum.autostart="YES"
    vinum.drives
    Alternatively, this variable can enumerate a list of disk devices to scan for configuration records. Note that only the ``bare'' device names need to be given, since will automatically scan all possible slices and partitions.

    Example:

    vinum.drives="da0 da1"

    If automatic startup is used, it is not necessary to set the start_vinum variable of rc.conf5. Note that if is to supply to the volume for the root file system, it is necessary to start the subsystem early. This can be achieved by specifying

    vinum_load="YES"

    in loader.conf5.  

    IOCTL CALLS

    ioctl(2) calls are intended for the use of the gvinum(8) configuration program only. They are described in the header file /sys/dev/vinum/vinumio.h  

    Disk Labels

    Conventional disk special devices have a disk label in the second sector of the device. See disklabel(5) for more details. This disk label describes the layout of the partitions within the device. does not subdivide volumes, so volumes do not contain a physical disk label. For convenience, implements the ioctl calls DIOCGDINFO (get disk label), DIOCGPART (get partition information), DIOCWDINFO (write partition information) and DIOCSDINFO (set partition information). DIOCGDINFO and DIOCGPART refer to an internal representation of the disk label which is not present on the volume. As a result, the -r option of disklabel(8), which reads the ``raw disk'' will fail.

    In general, disklabel(8) serves no useful purpose on a volume. If you run it, it will show you three partitions, `a' , `b' and `c' , all the same except for the fstype for example:

    3 partitions:
    #        size   offset    fstype   [fsize bsize bps/cpg]
      a:     2048        0    4.2BSD     1024  8192     0   # (Cyl.    0 - 0)
      b:     2048        0      swap                        # (Cyl.    0 - 0)
      c:     2048        0    unused        0     0         # (Cyl.    0 - 0)
    

    ignores the DIOCWDINFO and DIOCSDINFO ioctls, since there is nothing to change. As a result, any attempt to modify the disk label will be silently ignored.  

    MAKING FILE SYSTEMS

    Since volumes do not contain partitions, the names do not need to conform to the standard rules for naming disk partitions. For a physical disk partition, the last letter of the device name specifies the partition identifier (a to h). volumes need not conform to this convention, but if they do not, newfs(8) will complain that it cannot determine the partition. To solve this problem, use the -v flag to newfs(8). For example, if you have a volume concat use the following command to create a UFS file system on it:

    "newfs -v /dev/vinum/concat"
     

    OBJECT NAMING

    assigns default names to plexes and subdisks, although they may be overridden. We do not recommend overriding the default names. Experience with the Veritastm volume manager, which allows arbitrary naming of objects, has shown that this flexibility does not bring a significant advantage, and it can cause confusion.

    Names may contain any non-blank character, but it is recommended to restrict them to letters, digits and the underscore characters. The names of volumes, plexes and subdisks may be up to 64 characters long, and the names of drives may up to 32 characters long. When choosing volume and plex names, bear in mind that automatically generated plex and subdisk names are longer than the name from which they are derived.

     

    Example

    Assume the objects described in the section Sx CONFIGURATION FILE in gvinum(8). The directory /dev/vinum looks like:
    # ls -lR /dev/vinum
    total 5
    brwxr-xr--  1 root  wheel   25,   2 Mar 30 16:08 concat
    brwx------  1 root  wheel   25, 0x40000000 Mar 30 16:08 control
    brwx------  1 root  wheel   25, 0x40000001 Mar 30 16:08 controld
    drwxrwxrwx  2 root  wheel       512 Mar 30 16:08 drive
    drwxrwxrwx  2 root  wheel       512 Mar 30 16:08 plex
    drwxrwxrwx  2 root  wheel       512 Mar 30 16:08 rvol
    drwxrwxrwx  2 root  wheel       512 Mar 30 16:08 sd
    brwxr-xr--  1 root  wheel   25,   3 Mar 30 16:08 strcon
    brwxr-xr--  1 root  wheel   25,   1 Mar 30 16:08 stripe
    brwxr-xr--  1 root  wheel   25,   0 Mar 30 16:08 tinyvol
    drwxrwxrwx  7 root  wheel       512 Mar 30 16:08 vol
    brwxr-xr--  1 root  wheel   25,   4 Mar 30 16:08 vol5
    
    /dev/vinum/drive:
    total 0
    brw-r-----  1 root  operator    4,  15 Oct 21 16:51 drive2
    brw-r-----  1 root  operator    4,  31 Oct 21 16:51 drive4
    
    /dev/vinum/plex:
    total 0
    brwxr-xr--  1 root  wheel   25, 0x10000002 Mar 30 16:08 concat.p0
    brwxr-xr--  1 root  wheel   25, 0x10010002 Mar 30 16:08 concat.p1
    brwxr-xr--  1 root  wheel   25, 0x10000003 Mar 30 16:08 strcon.p0
    brwxr-xr--  1 root  wheel   25, 0x10010003 Mar 30 16:08 strcon.p1
    brwxr-xr--  1 root  wheel   25, 0x10000001 Mar 30 16:08 stripe.p0
    brwxr-xr--  1 root  wheel   25, 0x10000000 Mar 30 16:08 tinyvol.p0
    brwxr-xr--  1 root  wheel   25, 0x10000004 Mar 30 16:08 vol5.p0
    brwxr-xr--  1 root  wheel   25, 0x10010004 Mar 30 16:08 vol5.p1
    
    /dev/vinum/sd:
    total 0
    brwxr-xr--  1 root  wheel   25, 0x20000002 Mar 30 16:08 concat.p0.s0
    brwxr-xr--  1 root  wheel   25, 0x20100002 Mar 30 16:08 concat.p0.s1
    brwxr-xr--  1 root  wheel   25, 0x20010002 Mar 30 16:08 concat.p1.s0
    brwxr-xr--  1 root  wheel   25, 0x20000003 Mar 30 16:08 strcon.p0.s0
    brwxr-xr--  1 root  wheel   25, 0x20100003 Mar 30 16:08 strcon.p0.s1
    brwxr-xr--  1 root  wheel   25, 0x20010003 Mar 30 16:08 strcon.p1.s0
    brwxr-xr--  1 root  wheel   25, 0x20110003 Mar 30 16:08 strcon.p1.s1
    brwxr-xr--  1 root  wheel   25, 0x20000001 Mar 30 16:08 stripe.p0.s0
    brwxr-xr--  1 root  wheel   25, 0x20100001 Mar 30 16:08 stripe.p0.s1
    brwxr-xr--  1 root  wheel   25, 0x20000000 Mar 30 16:08 tinyvol.p0.s0
    brwxr-xr--  1 root  wheel   25, 0x20100000 Mar 30 16:08 tinyvol.p0.s1
    brwxr-xr--  1 root  wheel   25, 0x20000004 Mar 30 16:08 vol5.p0.s0
    brwxr-xr--  1 root  wheel   25, 0x20100004 Mar 30 16:08 vol5.p0.s1
    brwxr-xr--  1 root  wheel   25, 0x20010004 Mar 30 16:08 vol5.p1.s0
    brwxr-xr--  1 root  wheel   25, 0x20110004 Mar 30 16:08 vol5.p1.s1
    
    /dev/vinum/vol:
    total 5
    brwxr-xr--  1 root  wheel   25,   2 Mar 30 16:08 concat
    drwxr-xr-x  4 root  wheel       512 Mar 30 16:08 concat.plex
    brwxr-xr--  1 root  wheel   25,   3 Mar 30 16:08 strcon
    drwxr-xr-x  4 root  wheel       512 Mar 30 16:08 strcon.plex
    brwxr-xr--  1 root  wheel   25,   1 Mar 30 16:08 stripe
    drwxr-xr-x  3 root  wheel       512 Mar 30 16:08 stripe.plex
    brwxr-xr--  1 root  wheel   25,   0 Mar 30 16:08 tinyvol
    drwxr-xr-x  3 root  wheel       512 Mar 30 16:08 tinyvol.plex
    brwxr-xr--  1 root  wheel   25,   4 Mar 30 16:08 vol5
    drwxr-xr-x  4 root  wheel       512 Mar 30 16:08 vol5.plex
    
    /dev/vinum/vol/concat.plex:
    total 2
    brwxr-xr--  1 root  wheel   25, 0x10000002 Mar 30 16:08 concat.p0
    drwxr-xr-x  2 root  wheel       512 Mar 30 16:08 concat.p0.sd
    brwxr-xr--  1 root  wheel   25, 0x10010002 Mar 30 16:08 concat.p1
    drwxr-xr-x  2 root  wheel       512 Mar 30 16:08 concat.p1.sd
    
    /dev/vinum/vol/concat.plex/concat.p0.sd:
    total 0
    brwxr-xr--  1 root  wheel   25, 0x20000002 Mar 30 16:08 concat.p0.s0
    brwxr-xr--  1 root  wheel   25, 0x20100002 Mar 30 16:08 concat.p0.s1
    
    /dev/vinum/vol/concat.plex/concat.p1.sd:
    total 0
    brwxr-xr--  1 root  wheel   25, 0x20010002 Mar 30 16:08 concat.p1.s0
    
    /dev/vinum/vol/strcon.plex:
    total 2
    brwxr-xr--  1 root  wheel   25, 0x10000003 Mar 30 16:08 strcon.p0
    drwxr-xr-x  2 root  wheel       512 Mar 30 16:08 strcon.p0.sd
    brwxr-xr--  1 root  wheel   25, 0x10010003 Mar 30 16:08 strcon.p1
    drwxr-xr-x  2 root  wheel       512 Mar 30 16:08 strcon.p1.sd
    
    /dev/vinum/vol/strcon.plex/strcon.p0.sd:
    total 0
    brwxr-xr--  1 root  wheel   25, 0x20000003 Mar 30 16:08 strcon.p0.s0
    brwxr-xr--  1 root  wheel   25, 0x20100003 Mar 30 16:08 strcon.p0.s1
    
    /dev/vinum/vol/strcon.plex/strcon.p1.sd:
    total 0
    brwxr-xr--  1 root  wheel   25, 0x20010003 Mar 30 16:08 strcon.p1.s0
    brwxr-xr--  1 root  wheel   25, 0x20110003 Mar 30 16:08 strcon.p1.s1
    
    /dev/vinum/vol/stripe.plex:
    total 1
    brwxr-xr--  1 root  wheel   25, 0x10000001 Mar 30 16:08 stripe.p0
    drwxr-xr-x  2 root  wheel       512 Mar 30 16:08 stripe.p0.sd
    
    /dev/vinum/vol/stripe.plex/stripe.p0.sd:
    total 0
    brwxr-xr--  1 root  wheel   25, 0x20000001 Mar 30 16:08 stripe.p0.s0
    brwxr-xr--  1 root  wheel   25, 0x20100001 Mar 30 16:08 stripe.p0.s1
    
    /dev/vinum/vol/tinyvol.plex:
    total 1
    brwxr-xr--  1 root  wheel   25, 0x10000000 Mar 30 16:08 tinyvol.p0
    drwxr-xr-x  2 root  wheel       512 Mar 30 16:08 tinyvol.p0.sd
    
    /dev/vinum/vol/tinyvol.plex/tinyvol.p0.sd:
    total 0
    brwxr-xr--  1 root  wheel   25, 0x20000000 Mar 30 16:08 tinyvol.p0.s0
    brwxr-xr--  1 root  wheel   25, 0x20100000 Mar 30 16:08 tinyvol.p0.s1
    
    /dev/vinum/vol/vol5.plex:
    total 2
    brwxr-xr--  1 root  wheel   25, 0x10000004 Mar 30 16:08 vol5.p0
    drwxr-xr-x  2 root  wheel       512 Mar 30 16:08 vol5.p0.sd
    brwxr-xr--  1 root  wheel   25, 0x10010004 Mar 30 16:08 vol5.p1
    drwxr-xr-x  2 root  wheel       512 Mar 30 16:08 vol5.p1.sd
    
    /dev/vinum/vol/vol5.plex/vol5.p0.sd:
    total 0
    brwxr-xr--  1 root  wheel   25, 0x20000004 Mar 30 16:08 vol5.p0.s0
    brwxr-xr--  1 root  wheel   25, 0x20100004 Mar 30 16:08 vol5.p0.s1
    
    /dev/vinum/vol/vol5.plex/vol5.p1.sd:
    total 0
    brwxr-xr--  1 root  wheel   25, 0x20010004 Mar 30 16:08 vol5.p1.s0
    brwxr-xr--  1 root  wheel   25, 0x20110004 Mar 30 16:08 vol5.p1.s1
    

    In the case of unattached plexes and subdisks, the naming is reversed. Subdisks are named after the disk on which they are located, and plexes are named after the subdisk. Bf -symbolic This mapping is still to be determined. Ef  

    Object States

    Each object has a state associated with it. uses this state to determine the handling of the object.  

    Volume States

    Volumes may have the following states:

    down
    The volume is completely inaccessible.
    up
    The volume is up and at least partially functional. Not all plexes may be available.

     

    Plex States

    Plexes may have the following states:

    referenced
    A plex entry which has been referenced as part of a volume, but which is currently not known.
    faulty
    A plex which has gone completely down because of I/O errors.
    down
    A plex which has been taken down by the administrator.
    initializing
    A plex which is being initialized.

    The remaining states represent plexes which are at least partially up.

    corrupt
    A plex entry which is at least partially up. Not all subdisks are available, and an inconsistency has occurred. If no other plex is uncorrupted, the volume is no longer consistent.
    degraded
    A RAID-5 plex entry which is accessible, but one subdisk is down, requiring recovery for many I/O requests.
    flaky
    A plex which is really up, but which has a reborn subdisk which we do not completely trust, and which we do not want to read if we can avoid it.
    up
    A plex entry which is completely up. All subdisks are up.

     

    Subdisk States

    Subdisks can have the following states:

    empty
    A subdisk entry which has been created completely. All fields are correct, and the disk has been updated, but the on the disk is not valid.
    referenced
    A subdisk entry which has been referenced as part of a plex, but which is currently not known.
    initializing
    A subdisk entry which has been created completely and which is currently being initialized.

    The following states represent invalid data.

    obsolete
    A subdisk entry which has been created completely. All fields are correct, the config on disk has been updated, and the data was valid, but since then the drive has been taken down, and as a result updates have been missed.
    stale
    A subdisk entry which has been created completely. All fields are correct, the disk has been updated, and the data was valid, but since then the drive has been crashed and updates have been lost.

    The following states represent valid, inaccessible data.

    crashed
    A subdisk entry which has been created completely. All fields are correct, the disk has been updated, and the data was valid, but since then the drive has gone down. No attempt has been made to write to the subdisk since the crash, so the data is valid.
    down
    A subdisk entry which was up, which contained valid data, and which was taken down by the administrator. The data is valid.
    reviving
    The subdisk is currently in the process of being revived. We can write but not read.

    The following states represent accessible subdisks with valid data.

    reborn
    A subdisk entry which has been created completely. All fields are correct, the disk has been updated, and the data was valid, but since then the drive has gone down and up again. No updates were lost, but it is possible that the subdisk has been damaged. We will not read from this subdisk if we have a choice. If this is the only subdisk which covers this address space in the plex, we set its state to up under these circumstances, so this status implies that there is another subdisk to fulfill the request.
    up
    A subdisk entry which has been created completely. All fields are correct, the disk has been updated, and the data is valid.

     

    Drive States

    Drives can have the following states:

    referenced
    At least one subdisk refers to the drive, but it is not currently accessible to the system. No device name is known.
    down
    The drive is not accessible.
    up
    The drive is up and running.

     

    SEE ALSO

    disklabel(5), loader.conf5, disklabel(8), gvinum(8), loader(8), newfs(8)  

    HISTORY

    first appeared in Fx 3.0 . The RAID-5 component of was developed by Cybernet Inc. (http://www.cybernet.com/ ) for its NetMAX product.  

    AUTHORS

    An Greg Lehey Aq grog@lemis.com .  

    BUGS

    is a new product. Bugs can be expected. The configuration mechanism is not yet fully functional. If you have difficulties, please look at the section Sx DEBUGGING PROBLEMS WITH VINUM before reporting problems.

    Kernels with the device appear to work, but are not supported. If you have trouble with this configuration, please first replace the kernel with a non- kernel and test with the KLD module.

    Detection of differences between the version of the kernel and the KLD is not yet implemented.

    The RAID-5 functionality is new in Fx 3.3 . Some problems have been reported with in combination with soft updates, but these are not reproducible on all systems. If you are planning to use in a production environment, please test carefully.  

    DEBUGGING PROBLEMS WITH VINUM

    Solving problems with can be a difficult affair. This section suggests some approaches.  

    Configuration problems

    It is relatively easy (too easy) to run into problems with the configuration. If you do, the first thing you should do is stop configuration updates:

    "vinum setdaemon 4"

    This will stop updates and any further corruption of the on-disk configuration.

    Next, look at the on-disk configuration, using a Bourne-style shell:

    rm -f log
    for i in /dev/da0s1h /dev/da1s1h /dev/da2s1h /dev/da3s1h; do
      (dd if=$i skip=8 count=6|tr -d '\000-\011\200-\377'; echo) >> log
    done
    

    The names of the devices are the names of all slices. The file log should then contain something like this:

    IN VINOpanic.lemis.comdrive1}6E7~^K6T^Yfoovolume obj state up
    volume src state up
    volume raid state down
    volume r state down
    volume foo state up
    plex name obj.p0 state corrupt org concat vol obj
    plex name obj.p1 state corrupt org striped 128b vol obj
    plex name src.p0 state corrupt org striped 128b vol src
    plex name src.p1 state up org concat vol src
    plex name raid.p0 state faulty org disorg vol raid
    plex name r.p0 state faulty org disorg vol r
    plex name foo.p0 state up org concat vol foo
    plex name foo.p1 state faulty org concat vol foo
    sd name obj.p0.s0 drive drive2 plex obj.p0 state reborn len 409600b driveoffset 265b plexoffset 0b
    sd name obj.p0.s1 drive drive4 plex obj.p0 state up len 409600b driveoffset 265b plexoffset 409600b
    sd name obj.p1.s0 drive drive1 plex obj.p1 state up len 204800b driveoffset 265b plexoffset 0b
    sd name obj.p1.s1 drive drive2 plex obj.p1 state reborn len 204800b driveoffset 409865b plexoffset 128b
    sd name obj.p1.s2 drive drive3 plex obj.p1 state up len 204800b driveoffset 265b plexoffset 256b
    sd name obj.p1.s3 drive drive4 plex obj.p1 state up len 204800b driveoffset 409865b plexoffset 384b
    

    The first line contains the label and must start with the text ``IN VINO '' It also contains the name of the system. The exact definition is contained in /usr/src/sys/dev/vinum/vinumvar.h The saved configuration starts in the middle of the line with the text ``volume obj state up '' and starts in sector 9 of the disk. The rest of the output shows the remainder of the on-disk configuration. It may be necessary to increase the count argument of dd(1) in order to see the complete configuration.

    The configuration on all disks should be the same. If this is not the case, please report the problem with the exact contents of the file log There is probably little that can be done to recover the on-disk configuration, but if you keep a copy of the files used to create the objects, you should be able to re-create them. The create command does not change the subdisk data, so this will not cause data corruption. You may need to use the resetconfig command if you have this kind of trouble.  

    Kernel Panics

    In order to analyse a panic which you suspect comes from you will need to build a debug kernel. See the online handbook at /usr/share/doc/en/books/developers-handbook/kerneldebug.html (if installed) or http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/developers-handbook/kerneldebug.html for more details of how to do this.

    Perform the following steps to analyse a problem:

    1. Copy the following files to the directory in which you will be performing the analysis, typically /var/crash

    2. Make sure that you build the module with debugging information. The standard Makefile builds a module with debugging symbols by default. If the version of in /boot/kernel does not contain symbols, you will not get an error message, but the stack trace will not show the symbols. Check the module before starting gdb(1):
      $ file /boot/kernel/vinum.ko
      /boot/kernel/vinum.ko: ELF 32-bit LSB shared object, Intel 80386,
        version 1 (FreeBSD), not stripped
      

      If the output shows that /boot/kernel/vinum.ko is stripped, you will have to find a version which is not. Usually this will be either in /usr/obj/sys/modules/vinum/vinum.ko (if you have built with a ``make world '' or /usr/src/sys/modules/vinum/vinum.ko (if you have built in this directory). Modify the file .gdbinit.vinum.paths accordingly.

    3. Either take a dump or use remote serial gdb(1) to analyse the problem. To analyse a dump, say /var/crash/vmcore.5 link /var/crash/.gdbinit.crash to /var/crash/.gdbinit and enter:
      cd /var/crash
      gdb -k kernel.debug vmcore.5
      

      This example assumes that you have installed the correct debug kernel at /var/crash/kernel.debug If not, substitute the correct name of the debug kernel.

      To perform remote serial debugging, link /var/crash/.gdbinit.serial to /var/crash/.gdbinit and enter

      cd /var/crash
      gdb -k kernel.debug
      

      In this case, the .gdbinit file performs the functions necessary to establish connection. The remote machine must already be in debug mode: enter the kernel debugger and select gdb (see ddb(4) for more details). The serial .gdbinit file expects the serial connection to run at 38400 bits per second; if you run at a different speed, edit the file accordingly (look for the remotebaud specification).

      The following example shows a remote debugging session using the debug command of gvinum(8):

      GDB 4.16 (i386-unknown-freebsd), Copyright 1996 Free Software Foundation, Inc.
      Debugger (msg=0xf1093174 "vinum debug") at ../../i386/i386/db_interface.c:318
      318                 in_Debugger = 0;
      #1  0xf108d9bc in vinumioctl (dev=0x40001900, cmd=0xc008464b, data=0xf6dedee0 "",
          flag=0x3, p=0xf68b7940) at
          /usr/src/sys/modules/Vinum/../../dev/Vinum/vinumioctl.c:102
      102             Debugger ("vinum debug");
      (kgdb) bt
      #0  Debugger (msg=0xf0f661ac "vinum debug") at ../../i386/i386/db_interface.c:318
      #1  0xf0f60a7c in vinumioctl (dev=0x40001900, cmd=0xc008464b, data=0xf6923ed0 "",
            flag=0x3, p=0xf688e6c0) at
            /usr/src/sys/modules/vinum/../../dev/vinum/vinumioctl.c:109
      #2  0xf01833b7 in spec_ioctl (ap=0xf6923e0c) at ../../miscfs/specfs/spec_vnops.c:424
      #3  0xf0182cc9 in spec_vnoperate (ap=0xf6923e0c) at ../../miscfs/specfs/spec_vnops.c:129
      #4  0xf01eb3c1 in ufs_vnoperatespec (ap=0xf6923e0c) at ../../ufs/ufs/ufs_vnops.c:2312
      #5  0xf017dbb1 in vn_ioctl (fp=0xf1007ec0, com=0xc008464b, data=0xf6923ed0 "",
            p=0xf688e6c0) at vnode_if.h:395
      #6  0xf015dce0 in ioctl (p=0xf688e6c0, uap=0xf6923f84) at ../../kern/sys_generic.c:473
      #7  0xf0214c0b in syscall (frame={tf_es = 0x27, tf_ds = 0x27, tf_edi = 0xefbfcff8,
            tf_esi = 0x1, tf_ebp = 0xefbfcf90, tf_isp = 0xf6923fd4, tf_ebx = 0x2,
            tf_edx = 0x804b614, tf_ecx = 0x8085d10, tf_eax = 0x36, tf_trapno = 0x7,
            tf_err = 0x2, tf_eip = 0x8060a34, tf_cs = 0x1f, tf_eflags = 0x286,
            tf_esp = 0xefbfcf78, tf_ss = 0x27}) at ../../i386/i386/trap.c:1100
      #8  0xf020a1fc in Xint0x80_syscall ()
      #9  0x804832d in ?? ()
      #10 0x80482ad in ?? ()
      #11 0x80480e9 in ?? ()
      

      When entering from the debugger, it is important that the source of frame 1 (listed by the .gdbinit file at the top of the example) contains the text ``Debugger (q]vinum debugq]); ''

      This is an indication that the address specifications are correct. If you get some other output, your symbols and the kernel module are out of sync, and the trace will be meaningless.

    For an initial investigation, the most important information is the output of the bt (backtrace) command above.  

    Reporting Problems with Vinum

    If you find any bugs in , please report them to An Greg Lehey Aq grog@lemis.com . Supply the following information:


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    KERNEL CONFIGURATION
    Debug Options
    Other Options
    RUNNING VINUM
    Configuring and Starting Objects
    AUTOMATIC STARTUP
    IOCTL CALLS
    Disk Labels
    MAKING FILE SYSTEMS
    OBJECT NAMING
    Example
    Object States
    Volume States
    Plex States
    Subdisk States
    Drive States
    SEE ALSO
    HISTORY
    AUTHORS
    BUGS
    DEBUGGING PROBLEMS WITH VINUM
    Configuration problems
    Kernel Panics
    Reporting Problems with Vinum


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру