The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

utimensat (2)
  • >> utimensat (2) ( Linux man: Системные вызовы )
  •  

    NAME

    utimensat, futimens - change file timestamps with nanosecond precision
     
    

    SYNOPSIS

    #include <sys/stat.h>
    
    int utimensat(int dirfd, const char *pathname,
                  const struct timespec times[2], int flags);
    
    int futimens(int fd, const struct timespec times[2]);
    

    Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

    utimensat(): _ATFILE_SOURCE
    futimens(): _GNU_SOURCE /* Will likely change after POSIX.1-2008 changes are incorporated into glibc */  

    DESCRIPTION

    utimensat() and futimens() update the timestamps of a file with nanosecond precision. This contrasts with the historical utime(2) and utimes(2), which permit only second and microsecond precision, respectively, when setting file timestamps.

    With utimensat() the file is specified via the pathname given in pathname. With futimens() the file whose timestamps are to be updated is specified via an open file descriptor, fd.

    For both calls, the new file timestamps are specified in the array times: times[0] specifies the new "last access time" (atime); times[1] specifies the new "last modification time" (mtime). Each of the elements of times specifies a time in seconds and nanoseconds since the Epoch (00:00:00, 1 Jan 1970, UTC), in a structure of the following form:

    
    struct timespec {
        time_t tv_sec;        /* seconds */
        long   tv_nsec;       /* nanoseconds */
    };
    

    Updated file timestamps are set to the greatest value supported by the file system that is not greater than the specified time.

    If the tv_nsec field of one of the timespec structures has the special value UTIME_NOW, then the corresponding file timestamp is set to the current time. If the tv_nsec field of one of the timespec structures has the special value UTIME_OMIT, then the corresponding file timestamp is left unchanged. In both of these cases, the value of the corresponding tv_sec field is ignored.

    If times is NULL, then both timestamps are set to the current time.  

    Permissions requirements

    To set both file timestamps to the current time (i.e., times is NULL, or both tv_nsec fields specify UTIME_NOW), either:
    1.
    the caller must have write access to the file;
    2.
    the caller's effective user ID must match the owner of the file; or
    3.
    the caller must have appropriate privileges.

    To make any change other than setting both timestamps to the current time (i.e., times is not NULL, and both tv_nsec fields are not UTIME_NOW and both tv_nsec fields are not UTIME_OMIT), either condition 2 or 3 above must apply.

    If both tv_nsec fields are specified as UTIME_OMIT, then no file ownership or permission checks are performed, and the file timestamps are not modified, but other error conditions may still be detected.  

    utimensat() specifics

    If pathname is relative, then by default it is interpreted relative to the directory referred to by the open file descriptor, dirfd (rather than relative to the current working directory of the calling process, as is done by utimes(2) for a relative pathname). See openat(2) for an explanation of why this can be useful.

    If pathname is relative and dirfd is the special value AT_FDCWD, then pathname is interpreted relative to the current working directory of the calling process (like utimes(2)).

    If pathname is absolute, then dirfd is ignored.

    The flags field is a bit mask that may be 0, or include the following constant, defined in <fcntl.h>:

    AT_SYMLINK_NOFOLLOW
    If pathname specifies a symbolic link, then update the timestamps of the link, rather than the file to which it refers.
     

    RETURN VALUE

    On success, utimensat() and futimens() return 0. On error, -1 is returned and errno is set to indicate the error.  

    ERRORS

    EACCES
    times is NULL, or both tv_nsec values are UTIME_NOW, and:
    *
    the effective user ID of the caller does not match the owner of the file, the caller does not have write access to the file, and the caller is not privileged (Linux: does not have either the CAP_FOWNER or the CAP_DAC_OVERRIDE capability); or,
    *
    the file is marked immutable (see chattr(1)).
    EBADF
    (futimens()) fd is not a valid file descriptor.
    EBADF
    (utimensat()) pathname is a relative pathname, but dirfd is neither AT_FDCWD nor a valid file descriptor.
    EFAULT
    times pointed to an invalid address; or, dirfd was AT_FDCWD, and pathname is NULL or an invalid address.
    EINVAL
    Invalid value in flags.
    EINVAL
    Invalid value in one of the tv_nsec fields (value outside range 0 to 999,999,999, and not UTIME_NOW or UTIME_OMIT); or an invalid value in one of the tv_sec fields.
    EINVAL
    pathname is NULL, dirfd is not AT_FDCWD, and flags contains AT_SYMLINK_NOFOLLOW.
    ELOOP
    (utimensat()) Too many symbolic links were encountered in resolving pathname.
    ENAMETOOLONG
    (utimensat()) pathname is too long.
    ENOENT
    (utimensat()) A component of pathname does not refer to an existing directory or file, or pathname is an empty string.
    ENOTDIR
    (utimensat()) pathname is a relative pathname, but dirfd is neither AT_FDCWD nor a file descriptor referring to a directory; or, one of the prefix components of pathname is not a directory.
    EPERM
    The caller attempted to change one or both timestamps to a value other than the current time, or to change one of the timestamps to the current time while leaving the other timestamp unchanged, (i.e., times is not NULL, both tv_nsec fields are not UTIME_NOW, and both tv_nsec fields are not UTIME_OMIT) and:
    *
    the caller's effective user ID does not match the owner of file, and the caller is not privileged (Linux: does not have the CAP_FOWNER capability); or,
    *
    the file is marked append-only or immutable (see chattr(1)).
    EROFS
    The file is on a read-only file system.
    ESRCH
    (utimensat()) Search permission is denied for one of the prefix components of pathname.
     

    VERSIONS

    utimensat() was added to Linux in kernel 2.6.22; glibc support was added with version 2.6.

    Support for futimens() first appeared in glibc 2.6.  

    CONFORMING TO

    futimens() and utimensat() are specified in POSIX.1-2008.  

    NOTES

    utimensat() obsoletes futimesat(2).

    On Linux, timestamps cannot be changed for a file marked immutable, and the only change permitted for files marked append-only is to set the timestamps to the current time. (This is consistent with the historical behavior of utime(2) and utimes(2) on Linux.)

    On Linux, futimens() is a library function implemented on top of the utimensat() system call. To support this, the Linux utimensat() system call implements a non-standard feature: if pathname is NULL, then the call modifies the timestamps of the file referred to by the file descriptor dirfd (which may refer to any type of file). Using this feature, the call futimens(fd, times) is implemented as:

    
        utimensat(fd, NULL, times, 0);
    
     

    BUGS

    Several bugs afflict utimensat() and futimens() on kernels before 2.6.26. These bugs are either non-conformances with the POSIX.1 draft specification or inconsistencies with historical Linux behavior.
    *
    POSIX.1 specifies that if one of the tv_nsec fields has the value UTIME_NOW or UTIME_OMIT, then the value of the corresponding tv_sec field should be ignored. Instead, the value of the tv_sec field is required to be 0 (or the error EINVAL results).
    *
    Various bugs mean that for the purposes of permission checking, the case where both tv_nsec fields are set to UTIME_NOW isn't always treated the same as specifying times as NULL, and the case where one tv_nsec value is UTIME_NOW and the other is UTIME_OMIT isn't treated the same as specifying times as a pointer to an array of structures containing arbitrary time values. As a result, in some cases: a) file timestamps can be updated by a process that shouldn't have permission to perform updates; b) file timestamps can't be updated by a process that should have permission to perform updates; and c) the wrong errno value is returned in case of an error.
    *
    POSIX.1 says that a process that has write access to the file can make a call with times as NULL, or with times pointing to an array of structures in which both tv_nsec fields are UTIME_NOW, in order to update both timestamps to the current time. However, futimens() instead checks whether the access mode of the file descriptor allows writing.
     

    SEE ALSO

    chattr(1), futimesat(2), openat(2), stat(2), utimes(2), futimes(3), path_resolution(7), symlink(7)  

    COLOPHON

    This page is part of release 3.14 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    Permissions requirements
    utimensat() specifics
    RETURN VALUE
    ERRORS
    VERSIONS
    CONFORMING TO
    NOTES
    BUGS
    SEE ALSO
    COLOPHON


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру