The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

sane-coolscan (5)
  • >> sane-coolscan (5) ( Разные man: Форматы файлов )
  •  

    NAME

    sane-coolscan - SANE backend for Nikon film-scanners
    

     

    ABOUT THIS FILE

    This file is a short description of the coolscan-backend for sane!

     

    DESCRIPTION

    The sane-coolscan library implements a SANE backend that provides the interface to the following Nikon Coolscan Film scanners: Nikon LS20, LS30, LS1000, LS2000.

    Even though the backend has worked for a number of people, there are still some problems, especially in combination with some SCSI card/drivers (AHA-1505/aha152x.o) and the autofocus command. You should consider this backend 'alpha' and be careful when using it the first time.

     

    CONFIGURATION

    The configuration file for this backend resides in /etc/sane.d/coolscan.conf.

    Its contents is a list of device names that correspond to Nikon Coolscan scanners. Empty lines and lines starting with a hash mark (#) are ignored. A sample configuration file is shown below:

     #scsi Vendor Model Type 
     scsi Nikon * Scanner 
     /dev/scanner 
    

    The special device name must be a generic SCSI device or a symlink to such a device. To find out to which device your scanner is assigned and how you have to set the permissions of that device, have a look at sane-scsi.

     

    SCSI ADAPTER TIPS

    Some SCSI-adapters and low-level SCSI drivers do not work correctly with this backend and the Coolscan scanners. These systems hang when the autofocus command is send to the Scanner. To see a list of which card/driver combinations work or dont work have a look at: http://andreas.rick.free.fr/sane/autofocus.html.

     

    FILES

    The backend configuration file:
    /etc/sane.d/coolscan.conf
    The static library implementing this backend:
    /usr/lib/sane/libsane-coolscan.a
    The shared library implementing this backend:
    /usr/lib/sane/libsane-coolscan.so (present on systems that support dynamic loading)

     

    ENVIRONMENT

    SANE_DEBUG_COOLSCAN
    If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. E.g., a value of 128 requests all debug output to be printed. Smaller levels reduce verbosity: SANE_DEBUG_COOLSCAN values

    Examples:

    on bash:
    export SANE_DEBUG_COOLSCAN=8

    on csh:
    setenv SANE_DEBUG_COOLSCAN 8

     

    BUGS

    The autofocus command does not work with some SCSI card/driver combinations

    The gamma table is not implemented for the LS1000 yet.

    The dust-removal is not working yet

     

    SEE ALSO

    http://andreas.rick.free.fr/sane/
    The homepage of this backend
    http://www.sema.be/coolscan/
    The original version of the coolscan backend by Didier

    sane(7), sane-scsi(5)

     

    THANKS TO

    Didier Carlier - For writing the original Coolscan backend (without it I would not have started this)

    Oliver Rauch - For adapting xsane so quickly to the infrared stuff.

    All the other people working on SANE.

     

    AUTHOR

    Andreas Rick

     

    EMAIL-CONTACT

    andreas.rick@free.fr


     

    Index

    NAME
    ABOUT THIS FILE
    DESCRIPTION
    CONFIGURATION
    SCSI ADAPTER TIPS
    FILES
    ENVIRONMENT
    BUGS
    SEE ALSO
    THANKS TO
    AUTHOR
    EMAIL-CONTACT


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру