The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

rtcwake (8)
  • >> rtcwake (8) ( Linux man: Команды системного администрирования )
  •  

    NAME

    rtcwake - enter a system sleep state until specified wakeup time
     
    

    SYNOPSIS

    rtcwake [-hvVlua] [-d device] [-m standby_mode] -t time_t | -s seconds  

    DESCRIPTION

    This program is used to enter a system sleep state until specified wakeup time.

    This uses cross-platform Linux interfaces to enter a system sleep state, and leave it no later than a specified time. It uses any RTC framework driver that supports standard driver model wakeup flags.

    This is normally used like the old apmsleep utility, to wake from a suspend state like ACPI S1 (standby) or S3 (suspend-to-RAM). Most platforms can implement those without analogues of BIOS, APM, or ACPI. On some systems, this can also be used like nvram-wakeup, waking from states like ACPI S4 (suspend to disk). Not all systems have persistent media that are appropriate for such suspend modes.  

    Options

    -v | --verbose
    Be verbose.
    -h | --help
    Display a short help message that shows how to use the program.
    -V | --version
    Displays version information and exists.
    -a | --auto
    Reads the clock mode (whether the hardware clock is set to UTC or local time) from /etc/adjtime. That's the location where the hwclock stores that information.
    -l | --local
    Assumes that the hardware clock is set to local time, regardless of the contents of /etc/adjtime.
    -u | --utc
    Assumes that the hardware clock is set to UTC (Universal Time Coordinated), regardless of the contents of /etc/adjtime.
    -d device | --device device
    Uses device instead of rtc0 as realtime clock. This option is only relevant if your system has more than one RTC. You may specify rtc1, rtc2, ... here.
    -s seconds | --seconds seconds
    Sets the wakeup time to seconds in future from now.
    -t time_t | --time time_t
    Sets the wakeup time to the absolute time time_t. time_t is the time in seconds since 1970-01-01, 00:00 UTC. Use the date tool to convert between human-readable time and time_t.
    -m mode | --mode mode
    Use standby state mode. Valid values are standby, mem, disk and on (no suspend). The default is standby.
     

    HISTORY

    The program first appeared as kernel commit message for Linux 2.6 in the GIT commit 87ac84f42a7a580d0dd72ae31d6a5eb4bfe04c6d.  

    AVAILABILITY

    The rtcwake command is part of the util-linux-ng package and is available from ftp://ftp.kernel.org/pub/linux/utils/util-linux-ng/.  

    AUTHOR

    The program was written by David Brownell <david-b@pacbell.net> and improved by Bernhard Walle <bwalle@suse.de>.  

    COPYRIGHT

    This is free software. You may redistribute copies of it under the terms of the GNU General Public License <http://www.gnu.org/licenses/gpl.html>. There is NO WARRANTY, to the extent permitted by law.  

    SEE ALSO

    hwclock(8), date(1)


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    Options
    HISTORY
    AVAILABILITY
    AUTHOR
    COPYRIGHT
    SEE ALSO


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру