The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

ng_pppoe (4)
  • >> ng_pppoe (4) ( FreeBSD man: Специальные файлы /dev/* )

  • BSD mandoc
     

    NAME

    
    
    ng_pppoe
    
     - RFC 2516 PPPoE protocol netgraph node type
    
     
    

    SYNOPSIS

       #include <sys/types.h>
       #include <net/ethernet.h>
       #include <netgraph.h>
       #include <netgraph/ng_pppoe.h>
     

    DESCRIPTION

    The pppoe node type performs the PPPoE protocol. It is used in conjunction with the netgraph(4) extensions to the Ethernet framework to divert and inject Ethernet packets to and from a PPP agent (which is not specified).

    The NGM_PPPOE_GET_STATUS control message can be used at any time to query the current status of the PPPoE module. The only statistics presently available are the total packet counts for input and output. This node does not yet support the NGM_TEXT_STATUS control message.  

    HOOKS

    This node type supports the following hooks:

    ethernet
    The hook that should normally be connected to an ng_ether4 node. Once connected, will send a message down this hook to determine Ethernet address of the underlying node. Obtained address will be stored and then used for outgoing datagrams.
    debug
    Presently no use.
    [unspecified]
    Any other name is assumed to be a session hook that will be connected to a PPP client agent, or a PPP server agent.

     

    CONTROL MESSAGES

    This node type supports the generic control messages, plus the following:

    NGM_PPPOE_GET_STATUS
    This command returns status information in a struct ngpppoestat
    struct ngpppoestat {
        u_int   packets_in;     /* packets in from Ethernet */
        u_int   packets_out;    /* packets out towards Ethernet */
    };
    
    NGM_TEXT_STATUS
    This generic message returns a human-readable version of the node status. (not yet)
    NGM_PPPOE_CONNECT
    Tell a nominated newly created hook that its session should enter the state machine as a client. It must be newly created and a service name can be given as an argument. It is legal to specify a zero-length service name, this is common on some DSL setups. It is possible to request a connection to a specific access concentrator by its name using the "AC-Name\Service-Name" syntax. A session request packet will be broadcasted on the Ethernet. This command uses the ngpppoe_init_data structure shown below.
    NGM_PPPOE_LISTEN
    Tell a nominated newly created hook that its session should enter the state machine as a server listener. The argument given is the name of the service to listen for. A zero-length service name will match all requests for service. A matching service request packet will be passed unmodified back to the process responsible for starting the service. It can then examine it and pass it on to the session that is started to answer the request. This command uses the ngpppoe_init_data structure shown below.
    NGM_PPPOE_OFFER
    Tell a nominated newly created hook that its session should enter the state machine as a server. The argument given is the name of the service to offer. A zero-length service is legal. The State machine will progress to a state where it will await a request packet to be forwarded to it from the startup server, which in turn probably received it from a LISTEN mode hook (see above). This is so that information that is required for the session that is embedded in the original session request packet, is made available to the state machine that eventually answers the request. When the Session request packet is received, the session negotiation will proceed. This command uses the ngpppoe_init_data structure shown below.

    The three commands above use a common data structure:

    struct ngpppoe_init_data {
        char       hook[NG_HOOKSIZ];       /* hook to monitor on */
        u_int16_t  data_len;               /* service name length */
        char       data[0];                /* init data goes here */
    };
    

    NGM_PPPOE_SUCCESS
    This command is sent to the node that started this session with one of the above messages, and reports a state change. This message reports successful Session negotiation. It uses the structure shown below, and reports back the hook name corresponding to the successful session.
    NGM_PPPOE_FAIL
    This command is sent to the node that started this session with one of the above messages, and reports a state change. This message reports failed Session negotiation. It uses the structure shown below, and reports back the hook name corresponding to the failed session. The hook will probably have been removed immediately after sending this message.
    NGM_PPPOE_CLOSE
    This command is sent to the node that started this session with one of the above messages, and reports a state change. This message reports a request to close a session. It uses the structure shown below, and reports back the hook name corresponding to the closed session. The hook will probably have been removed immediately after sending this message. At present this message is not yet used and a NGM_PPPOE_FAIL message will be received at closure instead.
    NGM_PPPOE_ACNAME
    This command is sent to the node that started this session with one of the above messages, and reports the Access Concentrator Name.

    The four commands above use a common data structure:

    struct ngpppoe_sts {
        char    hook[NG_HOOKSIZ];    /* hook associated with event session */
    };
    

    NGM_PPPOE_GETMODE
    This command returns the current compatibility mode of the node as a string. ASCII form of this message is Qq Li pppoe_getmode . The following keywords can be returned:

    Qq standard
    The node operates according to RFC 2516.
    Qq 3Com
    When is a PPPoE client, it initiates a session encapsulating packets into incorrect 3Com ethertypes. This compatibility option does not affect server mode. In server mode supports both modes simultaneously, depending on the ethertype, the client used when connecting.
    Qq D-Link
    When is a PPPoE server serving only specific Service-Name(s), it will respond to a PADI requests with empty Service-Name tag, returning all available Service-Name(s) on node. This option is necessary for compatibility with D-Link DI-614+ and DI-624+ SOHO routers as clients, when serving only specific Service-Name. This compatibility option does not affect client mode.

    NGM_PPPOE_SETMODE
    Configure node to the specified mode. The string argument is required. This command understands the same keywords that are returned by the NGM_PPPOE_GETMODE command. ASCII form of this message is Qq Li pppoe_setmode . For example, the following command will configure the node to initiate the next session in the proprietary 3Com mode:
    ngctl msg fxp0:orphans pppoe_setmode '"3Com"'
    
    NGM_PPPOE_SETENADDR
    Set the node Ethernet address for outgoing datagrams. This message is important when a node has failed to obtain an Ethernet address from its peer on the ethernet hook, or when user wants to override this address with another one. ASCII form of this message is Qq Li setenaddr .

     

    SHUTDOWN

    This node shuts down upon receipt of a NGM_SHUTDOWN control message, when all session have been disconnected or when the ethernet hook is disconnected.  

    EXAMPLES

    The following code uses libnetgraph to set up a node and connect it to both a socket node and an Ethernet node. It can handle the case of when a node is already attached to the Ethernet. It then starts a client session.
    #include <stdio.h>
    #include <stdlib.h>
    #include <string.h>
    #include <ctype.h>
    #include <unistd.h>
    #include <sysexits.h>
    #include <errno.h>
    #include <err.h>
    
    #include <sys/types.h>
    #include <sys/socket.h>
    #include <sys/select.h>
    #include <net/ethernet.h>
    
    #include <netgraph.h>
    #include <netgraph/ng_ether.h>
    #include <netgraph/ng_pppoe.h>
    #include <netgraph/ng_socket.h>
    static int setup(char *ethername, char *service, char *sessname,
                                    int *dfd, int *cfd);
    
    int
    main()
    {
            int  fd1, fd2;
            setup("xl0", NULL, "fred", &fd1, &fd2);
            sleep (30);
    }
    
    static int
    setup(char *ethername, char *service, char *sessname,
                            int *dfd, int *cfd)
    {
            struct ngm_connect ngc; /* connect */
            struct ngm_mkpeer mkp;  /* mkpeer */
            /******** nodeinfo stuff **********/
            u_char          rbuf[2 * 1024];
            struct ng_mesg *const resp = (struct ng_mesg *) rbuf;
            struct hooklist *const hlist
                            = (struct hooklist *) resp->data;
            struct nodeinfo *const ninfo = &hlist->nodeinfo;
            int             ch, no_hooks = 0;
            struct linkinfo *link;
            struct nodeinfo *peer;
            /****message to connect PPPoE session*****/
            struct {
                    struct ngpppoe_init_data idata;
                    char            service[100];
            }               message;
            /********tracking our little graph ********/
            char            path[100];
            char            source_ID[NG_NODESIZ];
            char            pppoe_node_name[100];
            int             k;
    
            /*
             * Create the data and control sockets
             */
            if (NgMkSockNode(NULL, cfd, dfd) < 0) {
                    return (errno);
            }
            /*
             * find the ether node of the name requested by asking it for
             * it's inquiry information.
             */
            if (strlen(ethername) > 16)
                    return (EINVAL);
            sprintf(path, "%s:", ethername);
            if (NgSendMsg(*cfd, path, NGM_GENERIC_COOKIE,
                          NGM_LISTHOOKS, NULL, 0) < 0) {
                    return (errno);
            }
            /*
             * the command was accepted so it exists. Await the reply (It's
             * almost certainly already waiting).
             */
            if (NgRecvMsg(*cfd, resp, sizeof(rbuf), NULL) < 0) {
                    return (errno);
            }
            /**
             * The following is available about the node:
             * ninfo->name          (string)
             * ninfo->type          (string)
             * ninfo->id            (u_int32_t)
             * ninfo->hooks         (u_int32_t) (count of hooks)
             * check it is the correct type. and get it's ID for use
             * with mkpeer later.
             */
            if (strncmp(ninfo->type, NG_ETHER_NODE_TYPE,
                        strlen(NG_ETHER_NODE_TYPE)) != 0) {
                    return (EPROTOTYPE);
            }
            sprintf(source_ID, "[%08x]:", ninfo->id);
    
            /*
             * look for a hook already attached.
             */
            for (k = 0; k < ninfo->hooks; k++) {
                    /**
                     * The following are available about each hook.
                     * link->ourhook        (string)
                     * link->peerhook       (string)
                     * peer->name           (string)
                     * peer->type           (string)
                     * peer->id             (u_int32_t)
                     * peer->hooks          (u_int32_t)
                     */
                    link = &hlist->link[k];
                    peer = &hlist->link[k].nodeinfo;
    
                    /* Ignore debug hooks */
                    if (strcmp("debug", link->ourhook) == 0)
                            continue;
    
                    /* If the orphans hook is attached, use that */
                    if (strcmp(NG_ETHER_HOOK_ORPHAN,
                        link->ourhook) == 0) {
                            break;
                    }
                    /* the other option is the 'divert' hook */
                    if (strcmp("NG_ETHER_HOOK_DIVERT",
                        link->ourhook) == 0) {
                            break;
                    }
            }
    
            /*
             * See if we found a hook there.
             */
            if (k < ninfo->hooks) {
                    if (strcmp(peer->type, NG_PPPOE_NODE_TYPE) == 0) {
                            /*
                             * If it's a type PPPoE, we skip making one
                             * ourself, but we continue, using
                             * the existing one.
                             */
                            sprintf(pppoe_node_name, "[%08x]:", peer->id);
                    } else {
                            /*
                             * There is already someone hogging the data,
                             * return an error. Some day we'll try
                             * daisy-chaining..
                             */
                            return (EBUSY);
                    }
            } else {
    
                    /*
                     * Try make a node of type PPPoE against node "ID"
                     * On hook NG_ETHER_HOOK_ORPHAN.
                     */
                    snprintf(mkp.type, sizeof(mkp.type),
                             "%s", NG_PPPOE_NODE_TYPE);
                    snprintf(mkp.ourhook, sizeof(mkp.ourhook),
                             "%s", NG_ETHER_HOOK_ORPHAN);
                    snprintf(mkp.peerhook, sizeof(mkp.peerhook),
                             "%s", NG_PPPOE_HOOK_ETHERNET);
                    /* Send message */
                    if (NgSendMsg(*cfd, source_ID, NGM_GENERIC_COOKIE,
                                  NGM_MKPEER, &mkp, sizeof(mkp)) < 0) {
                            return (errno);
                    }
                    /*
                     * Work out a name for the new node.
                     */
                    sprintf(pppoe_node_name, "%s:%s",
                            source_ID, NG_ETHER_HOOK_ORPHAN);
            }
            /*
             * We now have a PPPoE node attached to the Ethernet
             * card. The Ethernet is addressed as ethername: The PPPoE
             * node is addressed as pppoe_node_name: attach to it.
             * Connect socket node to specified node Use the same hook
             * name on both ends of the link.
             */
            snprintf(ngc.path, sizeof(ngc.path), "%s", pppoe_node_name);
            snprintf(ngc.ourhook, sizeof(ngc.ourhook), "%s", sessname);
            snprintf(ngc.peerhook, sizeof(ngc.peerhook), "%s", sessname);
    
            if (NgSendMsg(*cfd, ".:", NGM_GENERIC_COOKIE,
                          NGM_CONNECT, &ngc, sizeof(ngc)) < 0) {
                    return (errno);
            }
    
    #ifdef  NONSTANDARD
            /*
             * In some cases we are speaking to 3Com hardware, so
             * configure node to non-standard mode.
             */
            if (NgSendMsg(*cfd, ngc.path, NGM_PPPOE_COOKIE,
                            NGM_PPPOE_SETMODE, NG_PPPOE_NONSTANDARD,
                            strlen(NG_PPPOE_NONSTANDARD) + 1) == -1) {
                    return (errno);
            }
    #endif
    
            /*
             * Send it a message telling it to start up.
             */
            bzero(&message, sizeof(message));
            snprintf(message.idata.hook, sizeof(message.idata.hook),
                                    "%s", sessname);
            if (service == NULL) {
                    message.idata.data_len = 0;
            } else {
                    snprintf(message.idata.data,
                             sizeof(message.idata.data), "%s", service);
                    message.idata.data_len = strlen(service);
            }
            /* Tell session/hook to start up as a client */
            if (NgSendMsg(*cfd, ngc.path,
                          NGM_PPPOE_COOKIE, NGM_PPPOE_CONNECT, &message.idata,
                          sizeof(message.idata) + message.idata.data_len) < 0) {
                    return (errno);
            }
            return (0);
    }
    
     

    SEE ALSO

    netgraph(3), netgraph(4), ng_ether4, ng_ppp4, ng_socket4, ngctl(8), ppp(8)
    L. Mamakos K. Lidl J. Evarts D. Carrel D. Simone R. Wheeler "A Method for transmitting PPP over Ethernet (PPPoE)" RFC 2516
     

    HISTORY

    The node type was implemented in Fx 4.0 .  

    AUTHORS

    An Julian Elischer Aq julian@FreeBSD.org


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    HOOKS
    CONTROL MESSAGES
    SHUTDOWN
    EXAMPLES
    SEE ALSO
    HISTORY
    AUTHORS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру