The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

newsfeeds (5)
  • >> newsfeeds (5) ( Linux man: Форматы файлов )
  •  

    NAME

    newsfeeds - determine where Usenet articles get sent
     
    

    DESCRIPTION

    The file <pathetc in inn.conf>/newsfeeds specifies how incoming articles should be distributed to other sites. It is parsed by the InterNetNews server innd(8) when it starts up, or when directed to by ctlinnd(8).

    The file is interpreted as a set of lines according to the following rules. If a line ends with a backslash, then the backslash, the newline, and any whitespace at the start of the next line is deleted. This is repeated until the entire ``logical'' line is collected. If the logical line is blank, or starts with a number sign (``#''), it is ignored.

    All other lines are interpreted as feed entries. An entry should consist of four colon-separated fields; two of the fields may have optional sub-fields, marked off by a slash. Fields or sub-fields that take multiple parameters should be separated by a comma. Extra whitespace can cause problems. Except for the site names, case is significant. The format of an entry is:

    sitename[/exclude,exclude,...]\
            :pattern,pattern...[/distrib,distrib...]\
            :flag,flag...\
            :param
    
    Each field is described below.

    The sitename is the name of the site to which a news article can be sent. It is used for writing log entries and for determining if an article should be forwarded to a site. If sitename already appears in the article's Path header, then the article will not be sent to the site. The name is usually whatever the remote site uses to identify itself in the Path line, but can be almost any word that makes sense; special local entries (such as archivers or gateways) should probably end with an exclamation point to make sure that they do not have the same name as any real site. For example, ``gateway'' is an obvious name for the local entry that forwards articles out to a mailing list. If a site with the name ``gateway'' posts an article, when the local site receives the article it will see the name in the Path and not send the article to its own ``gateway'' entry. See also the description of the ``Ap'' flag, below. If an entry has an exclusion sub-field, then the article will not be sent to that site if any of the names specified as excludes appear in the Path header. The same sitename can be used more than once --- the appropriate action will be taken for each entry that should receive the article, regardless of the name --- although this is recommended only for program feeds to avoid confusion. Case is not significant in site names.

    The patterns specify which groups to send to the site and are interpreted to build a ``subscription list'' for the site. The default subscription is to get all groups. The patterns in the field are wildmat(3)-style patterns, and are matched in order against the list of newsgroups that the local site receives. If the first character of a pattern is an exclamation mark, then any groups matching the pattern are removed from the subscription, otherwise any matching groups are added. For example, to receive all ``comp'' groups, but only comp.sources.unix within the sources newsgroups, the following set of patterns can be used:

    comp.*,!comp.sources.*,comp.sources.unix
    
    There are three things to note about this example. The first is that the trailing ``.*'' is required. The second is that, again, the result of the last match is the most important. The third is that ``comp.sources.*'' could be written as ``comp.sources*'' but this would not have the same effect if there were a ``comp.sources-only'' group.

    There is also a way to subscribe to a newsgroup negatively. That is to say, do not send this group even if the article is cross-posted to a subscribed newsgroup. If the first character of a pattern is an atsign ``@'', it means that any article posted to a group matching the pattern will not be sent even though the article may be cross-posted to a group which is subscribed. The same rules of precedence apply in that the last match is the one which counts. For example, if you want to prevent all articles posted to any "alt.binaries.warez" group from being propagated even if it is cross-posted to another "alt" group or any other group for that matter, then the following set of patterns can be used:

    alt.*,@alt.binaries.warez.*,misc.*
    
    If you reverse the alt.* and alt.binaries.warez.* patterns, it would nullify the atsign because the result of the last match is the one that counts. Using the above example, if an article is posted to one or more of the alt.binaries.warez.* groups and is cross-posted to misc.test, then the article is not sent.

    See innd(8) for details on the propagation of control messages.

    A subscription can be further modified by specifying ``distributions'' that the site should or should not receive. The default is to send all articles to all sites that subscribe to any of the groups where it has been posted , but if an article has a Distribution header and any distribs are specified, then they are checked according to the following rules:

    1.
    If the Distribution header matches any of the values in the sub-field, then the article is sent.
    2.
    If a distrib starts with an exclamation point, and it matches the Distribution header, then the article is not sent.
    3.
    If Distribution header does not match any distrib in the site's entry, and no negations were used, then the article is not sent.
    4.
    If Distribution header does not match any distrib in the site's entry, and any distrib started with an exclamation point, then the article is sent.

    If an article has more than one distribution specified, then each one is according to the above rules. If any of the specified distributions indicate that the article should be sent, it is; if none do, it is not sent --- the rules are used as a ``logical or.'' It is almost definitely a mistake to have a single feed that specifies distributions that start with an exclamation point along with some that don't.

    Distributions are text words, not patterns; entries like ``*'' or ``all'' have no special meaning.

    The flags parameter specifies miscellaneous parameters. They may be specified in any order; flags that take values should have the value immediately after the flag letter with no whitespace. The valid flags are:

    <size
    An article will only be sent to the site if it is less than size bytes long. The default is no limit.
    >size
    An article will only be sent to the site if it is greater than size bytes long. The default is no limit.
    Achecks
    An article will only be sent to the site if it meets the requirements specified in the checks, which should be chosen from the following set:
            c       Exclude all kinds of control messages
            C       Only include all kinds of control messages
            d       Distribution header required
            e       Only include message whose newsgroups in
                    Newsgroups header all exist in active
            o       Overview data is created
            O       Propagate articles without X-Trace header
                    even if ``O'' flag is specified
            p       Do not check Path header for the sitename
                    before propagating (the exclusions are
                    still checked).
    
    If both ``c'' and ``C'' are specified simultaneously, the last specified one is adopted.
    Bhigh/low
    If a site is being fed by a file, channel, or exploder (see below), the server will normally start trying to write the information as soon as possible. Providing a buffer may give better system performance and help smooth out overall load if a large batch of news comes in. The value of the this flag should be two numbers separated by a slash. The first specifies the point at which the server can start draining the feed's I/O buffer, and the second specifies when to stop writing and begin buffering again; the units are bytes. The default is to do no buffering, sending output as soon as it is possible to do so.
    Ccount
    If this flag is specified, an article will only be sent to the site if the following is true: The number of groups it is posted to, plus the square of the number of groups followups would appear in, is no more than count newsgroups. 30 is a good value for this flag.
    Fname
    This flag specifies the name of the file that should be used if it is necessary to begin spooling for the site (see below). If name is not an absolute pathname, it is taken to be relative to <pathoutgoing in inn.conf>. Then, if the destination is a directory, the file togo in that directory will be used as filename.
    Gcount
    If this flag is specified, an article will only be sent to the site if it is posted to no more than count newsgroups. This has the problem of filtering out many FAQs, and also RFDs/CFVs for group creation. The C or U flags are a better solution.
    Hcount
    If this flag is specified, an article will only be sent to the site if it has count or fewer sites in its Path line. This flag should only be used as a rough guide because of the loose interpretation of the Path header; some sites put the poster's name in the header, and some sites that might logically be considered to be one hop become two because they put the posting workstation's name in the header. The default value for count is one.
    Isize
    The flag specifies the size of the internal buffer for a file feed. If there are more file feeds than allowed by the system, they will be buffered internally in least-recently-used order. If the internal buffer grows bigger then size bytes, however, the data will be written out to the appropriate file. The default value is <SITE_BUFFER_SIZE in include/config.h> (typically (16 * 1024 )) bytes.
    Nmodifiers
    The newsgroups that a site receives are modified according to the modifiers, which should be chosen from the following set:
            m       Only moderated groups
            u       Only unmoderated groups
    
    OOriginator
    If this flag is used then articles sent to this feed must contain a X-Trace header and the first field in the header must match originator. Originator can be a list of wildmat(3)-style pattern. The list is separated by ``/''. Article is never sent, if the first character of the pattern begins with ``@'' and rest of the pattern matches. One use of this flag is to restrict the feed to locally generated posts.
    Ppriority
    The nice priority that this channel or program feed should receive. This should be a positive number between 0 and 20, and is the priority that the new process will run with. This flag can be used to raise the priority to normal if you are using the ``nicekids'' in inn.conf(5).
    Ssize
    If the amount of data queued for the site gets to be larger than size bytes, then the server will switch to spooling, appending to a file specified by the ``F'' flag, or <pathoutgoing in inn.conf>/sitename if the ``F'' flag is not specified. Spooling usually happens only for channel or exploder feeds.
    Ttype
    This flag specifies the type of feed for the site. Type should be a letter chosen from the following set:
            c       Channel
            f       File
            l       Log entry only
            m       Funnel (multiple entries feed into one)
            p       Program
            x       Exploder
    
    Each feed is described below in the section on feed types. The default is Tf.
    Ucount
    If this flag is specified, an article will only be sent to the site if followups to this article would be posted to no more than count newsgroups.
    Witems
    If a site is fed by file, channel, or exploder, this flag controls what information is written. If a site is fed by a program, only the asterisk (``*'') has any effect. The items should be chosen from the following set:
            b       Size of wire formatted article in bytes
            e       The time article will be expired as
                    seconds since epoch
                    ``0'' means there is no ``Expires'' header
            f       Token of the article (equivalent to ``n'')
            g       The newsgroup the article is in;
                    if cross-posted, then the first of the
                    groups this site gets (the differnece from
                    ``G'' is that article belongs to its
                    newsgroup even if it is congrol message)
            h       Article's Message-ID hash key
            m       Article's Message-ID
            n       Token of the article
            p       The time the article was posted as seconds
                    since epoch
            s       The site that fed the article to the
                    server; from the Path: header or the IP
                    address of the site that sent the article
                    depending on the ``logipaddr'' field in
    inn.conf(8);
                    if ``logipaddr'' is ``true'' and IP
                    address is ``0.0.0.0'' which means the
                    article is feeded from localhost (e.g.
                    from rnews), the result will be retrieved
                    from Path: header
            t       The time article was received as seconds
                    since epoch
            *       Names of the appropriate funnel entries;
                    or all sites that get the article
            D       Value of the Distribution header; ? if
                    none present
            G       Where the article is stored; if cross-
                    posted, then the first of the groups this
                    site gets (the differnece from ``g'' is
                    that cmsg belongs to ``control.cmsg'')
            H       All headers
            N       Value of the Newsgroups header
            P       Article's Path header
            O       Overview data
            R       Information needed for replication
    
    More than one letter can be used; the entries will be separated by a space, and written in the order in which they are specified. The default is Wn.

    The ``H'' and ``O'' items are intended for use by programs that create news overview databases. If ``H'' is present, then the all the article's headers are written followed by a blank line. An Xref header (even if one does not appear in the filed article) and a Bytes header, specifying the article's size (see ``b'' description below for clarifying size meaning), will also be part of the headers. If used, this should be the only item in the list; if preceded by other items, however, a newline will be written before the headers. The ``nteO'' generates input to the overchan(8) program.

    The asterisk has special meaning. It expands to a space-separated list of all sites that received the current article. If the site is the target of a funnel however (i.e., it is named by other sites which have a ``Tm'' flag), then the asterisk expands to the names of the funnel feeds that received the article. If the site is fed by a program, then an asterisk in the param field will be expanded into the list of funnel feeds that received the article. A site fed by a program cannot get the site list unless it is the target of other ``Tm'' feeds.

    The interpretation of the param field depends on the type of feed, and is explained in more detail below in the section on feed types. It can be omitted.

    The site named ME is special. There must be exactly one such entry, and it should be the first entry in the file. If the ME entry has an exclusion sub-field, then the articles are rejected if any of the names specified as excludes appear in the Path header. If the ME entry has a subscription list, then that list is automatically prepended to the subscription list of all other entries. For example, ``*,!control,!junk,!foo.*'' can be used to set up the initial subscription list for all feeds so that local postings are not propagated unless ``foo.*'' explicitly appears in the site's subscription list. Note that most subscriptions should have ``!junk,!control'' in their pattern list; see the discussion of ``control messages'' in innd(8). (Unlike other news software, it does not affect what groups are received; that is done by the active(5) file.)

    If the ME entry has a distribution subfield, then only articles that match the distribution list are accepted; all other articles are rejected. A commercial news server, for example, might have ``/!local'' to reject local postings from other, misconfigured, sites.  

    FEED TYPES

    Innd provides four basic types of feeds: log, file, program, and channel. An exploder is a special type of channel. In addition, several entries can feed into the same feed; these are funnel feeds, that refer to an entry that is one of the other types. Note that the term ``feed'' is technically a misnomer, since the server does not transfer articles, but reports that an article should be sent to the site.

    The simplest feed is one that is fed by a log entry. Other than a mention in the news logfile, <pathlog in inn.conf>/news, no data is ever written out. This is equivalent to a ``Tf'' entry writing to /dev/null except that no file is opened.

    A site fed by a file is the next simplest type of feed. When the site should receive an article, one line is written to the file named by the param field. If param is not an absolute pathname, it is taken to be relative to <pathoutgoing in inn.conf>. If empty, the filename defaults to <pathoutgoing in inn.conf>/sitename. This name should be unique.

    When a site fed by a file is flushed (see ctlinnd), the following steps are performed. The script doing the flush should have first renamed the file. The server tries to write out any buffered data, and then closes the file. The renamed file is now available for use. The server will then re-open the original file, which will now get created.

    A site fed by a program has a process spawned for every article that the site receives. The param field must be a sprintf(3) format string that may have a single %s parameter, which will be a token. Standard input will not be set to the article. Standard output and error will be set to the error log ( <pathlogininn.conf>/errlog.) The process will run with the user and group ID of the <pathrun in inn.conf> directory. Innd will try to avoid spawning a shell if the command has no shell meta-characters; this feature can be defeated by appending a semi-colon to the end of the command. The full pathname of the program to be run must be specified; for security, PATH environment is not searched.

    If the entry is the target of a funnel, and if the ``W*'' flag is used, then a single asterisk may be used in the param field where it will be replaced by the names of the sites that fed into the funnel. If the entry is not a funnel, or if the ``W*'' flag is not used, then the asterisk has no special meaning.

    Flushing a site fed by a program does no action.

    When a site is fed by a channel or exploder, the param field names the process to start. Again, the full pathname of the process must be given. When the site is to receive an article, the process receives a line on its standard input telling it about the article. Standard output and error, and the user and group ID of the all sub-process are set as for a program feed, above. If the process exits, it will be restarted. If the process cannot be started, the server will spool input to a file named <pathoutgoing in inn.conf>/sitename. It will then try to start the process some time later.

    When a site fed by a channel or exploder is flushed, the server closes down its end of the pipe. Any pending data that has not been written will be spooled; see the description of the ``S'' flag, above. No signal is sent; it is up to the program to notice EOF on its standard input and exit. The server then starts a new process.

    Exploders are a superset of channel feeds. In addition to channel behavior, exploders can be sent command lines. These lines start with an exclamation point, and their interpretation is up to the exploder. The following messages are generated automatically by the server:

    newgroup group
    rmgroup group
    flush
    flush site
    
    These messages are sent when the ctlinnd command of the same name is received by the server. In addition, the ``send'' command can be used to send an arbitrary command line to the exploder child-process. The primary exploder is buffchan(8).

    Funnel feeds provide a way of merging several site entries into a single output stream. For a site feeding into a funnel, the param field names the actual entry that does the feeding.  

    EXAMPLES

    ##  Initial subscription list and our distributions.
    ME:*,!junk,!foo.*/world,usa,na,ne,foo,ddn,gnu,inet\
            ::
    ##  Feed all moderated source postings to an archiver
    source-archive!:!*,*sources*,!*wanted*,!*.d\
            :Tc,Wn:<PREFIX specified with --prefix at configure>/bin/archive -f -i \
                /usr/spool/news.archive/INDEX
    ##  Watch for big postings
    watcher!:*\
            :Tc,Wbnm\
            :exec awk '$1 > 1000000 { print "BIG", $2, $3 }' >/dev/console
    ##  A UUCP feed, where we try to keep the "batching" between 4 and 1K.
    ihnp4:/world,usa,na,ddn,gnu\
            :Tf,Wnb,B4096/1024:
    ##  Usenet as mail; note ! in funnel name to avoid Path conflicts.
    ##  Can't use ! in "fred" since it would like look a UUCP address.
    fred:!*,comp.sources.unix,comp.sources.bugs\
            :Tm:mailer!
    barney@bar.com:!*,news.software.nntp,comp.sources.bugs\
            :Tm:mailer!
    mailer!:!*\
            :W*,Tp:/usr/ucb/Mail -s "News article" *
    ##  NNTP feeds fed off-line via nntpsend or equivalent.
    feed1::Tf,Wnm:feed1.domain.name
    peer.foo.com:foo.*:Tf,Wnm:peer.foo.com
    ##  Real-time transmission.
    mit.edu:/world,usa,na,ne,ddn,gnu,inet\
            :Tc,Wnm:<PREFIX specified with --prefix at configure>/bin/nntplink -i stdin mit.edu
    ##  Two sites feeding into a hypothetical NNTP fan-out program:
    nic.near.net:\
            :Tm:nntpfunnel1
    uunet.uu.net/uunet:!ne.*/world,usa,na,foo,ddn,gnu,inet\
            :Tm:nntpfunnel1
    nntpfunnel1:!*\
            :Tc,Wmn*:<PREFIX specified with --prefix at configure>/bin/nntpfanout
    ##  A UUCP site that wants comp.* and moderated soc groups
    uucpsite!comp:!*,comp.*/world,usa,na,gnu\
            :Tm:uucpsite
    uucpsite!soc:!*,soc.*/world,usa,na,gnu\
            :Tm,Nm:uucpsite
    uucpsite:!*\
            :Tf,Wnb:/usr/spool/batch/uucpsite
    

    The last two sets of entries show how funnel feeds can be used. For example, the nntpfanout program would receive lines like the following on its standard input:

    <123@litchi.foo.com> comp/sources/unix/888 nic.near.net uunet.uu.net
    <124@litchi.foo.com> ne/general/1003 nic.near.net
    
    Since the UUCP funnel is only destined for one site, the asterisk is not needed and entries like the following will be written into the file:
    <qwe#37x@snark.uu.net> comp/society/folklore/3
    <123@litchi.foo.com> comp/sources/unix/888
    
     

    HISTORY

    Written by Rich $alz <rsalz@uunet.uu.net> for InterNetNews. This is revision 1.29.2.1, dated 2000/08/17.  

    SEE ALSO

    active(5), buffchan(8), ctlinnd(8), inn.conf(5), innd(8), wildmat(3).


     

    Index

    NAME
    DESCRIPTION
    FEED TYPES
    EXAMPLES
    HISTORY
    SEE ALSO


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру