The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

dhclient (8)
  • dhclient (8) ( FreeBSD man: Команды системного администрирования )
  • >> dhclient (8) ( Linux man: Команды системного администрирования )
  •  

    NAME

    dhclient - Dynamic Host Configuration Protocol Client
     
    

    SYNOPSIS

    dhclient [ -p port ] [ -d ] [ -e VAR=value ] [ -q ] [ -1 ] [ -r ] [ -lf lease-file ] [ -pf pid-file ] [ -cf config-file ] [ -sf script-file ] [ -s server ] [ -g relay ] [ -n ] [ -nw ] [ -w ] [ -x ] [ -I dhcp-client-identifier ] [ -H host-name -F fqdn.fqdn ] [ -V vendor-class-identifier ] [ -R request option list ] [ -T timeout ] [ if0 [ ...ifN ] ]  

    DESCRIPTION

    The Internet Systems Consortium DHCP Client, dhclient, provides a means for configuring one or more network interfaces using the Dynamic Host Configuration Protocol, BOOTP protocol, or if these protocols fail, by statically assigning an address.  

    OPERATION

    The DHCP protocol allows a host to contact a central server which maintains a list of IP addresses which may be assigned on one or more subnets. A DHCP client may request an address from this pool, and then use it on a temporary basis for communication on network. The DHCP protocol also provides a mechanism whereby a client can learn important details about the network to which it is attached, such as the location of a default router, the location of a name server, and so on.

    On startup, dhclient reads the dhclient.conf for configuration instructions. It then gets a list of all the network interfaces that are configured in the current system. For each interface, it attempts to configure the interface using the DHCP protocol.

    In order to keep track of leases across system reboots and server restarts, dhclient keeps a list of leases it has been assigned in the dhclient.leases(5) file. On startup, after reading the dhclient.conf file, dhclient reads the dhclient.leases file to refresh its memory about what leases it has been assigned.

    When a new lease is acquired, it is appended to the end of the dhclient.leases file. In order to prevent the file from becoming arbitrarily large, from time to time dhclient creates a new dhclient.leases file from its in-core lease database. The old version of the dhclient.leases file is retained under the name dhclient.leases~ until the next time dhclient rewrites the database.

    Old leases are kept around in case the DHCP server is unavailable when dhclient is first invoked (generally during the initial system boot process). In that event, old leases from the dhclient.leases file which have not yet expired are tested, and if they are determined to be valid, they are used until either they expire or the DHCP server becomes available.

    A mobile host which may sometimes need to access a network on which no DHCP server exists may be preloaded with a lease for a fixed address on that network. When all attempts to contact a DHCP server have failed, dhclient will try to validate the static lease, and if it succeeds, will use that lease until it is restarted.

    A mobile host may also travel to some networks on which DHCP is not available but BOOTP is. In that case, it may be advantageous to arrange with the network administrator for an entry on the BOOTP database, so that the host can boot quickly on that network rather than cycling through the list of old leases.  

    COMMAND LINE

    The names of the network interfaces that dhclient should attempt to configure may be specified on the command line. If no interface names are specified on the command line dhclient will normally identify all network interfaces, eliminating non-broadcast interfaces if possible, and attempt to configure each interface.

    It is also possible to specify interfaces by name in the dhclient.conf(5) file. If interfaces are specified in this way, then the client will only configure interfaces that are either specified in the configuration file or on the command line, and will ignore all other interfaces.

    If the DHCP client should listen and transmit on a port other than the standard (port 68), the -p flag may used. It should be followed by the udp port number that dhclient should use. This is mostly useful for debugging purposes. If a different port is specified for the client to listen on and transmit on, the client will also use a different destination port - one greater than the specified destination port.

    The DHCP client normally transmits any protocol messages it sends before acquiring an IP address to, 255.255.255.255, the IP limited broadcast address. For debugging purposes, it may be useful to have the server transmit these messages to some other address. This can be specified with the -s flag, followed by the IP address or domain name of the destination.

    For testing purposes, the giaddr field of all packets that the client sends can be set using the -g flag, followed by the IP address to send. This is only useful for testing, and should not be expected to work in any consistent or useful way.

    The DHCP client will normally run in the foreground until it has configured an interface, and then will revert to running in the background. To run force dhclient to always run as a foreground process, the -d flag should be specified. This is useful when running the client under a debugger, or when running it out of inittab on System V systems.

    The dhclient daemon creates its own environment when executing the dhclient-script to do the grunt work of interface configuration. To define extra environment variables and their values, use the -e flag, followed by the environment variable name and value assignment, just as one would assign a variable in a shell. Eg: -e IF_METRIC=1

    The client normally prints a startup message and displays the protocol sequence to the standard error descriptor until it has acquired an address, and then only logs messages using the syslog (3) facility. The -q flag prevents any messages other than errors from being printed to the standard error descriptor.

    The client normally doesn't release the current lease as it is not required by the DHCP protocol. Some cable ISPs require their clients to notify the server if they wish to release an assigned IP address. The -r flag explicitly releases the current lease, and once the lease has been released, the client exits.

    The -1 flag cause dhclient to try once to get a lease. If it fails, dhclient exits with exit code two.

    The DHCP client normally gets its configuration information from /etc/dhclient.conf, its lease database from /var/lib/dhcpd/dhclient.leases, stores its process ID in a file called /var/run/dhclient.pid, and configures the network interface using /sbin/dhclient-script To specify different names and/or locations for these files, use the -cf, -lf, -pf and -sf flags, respectively, followed by the name of the file. This can be particularly useful if, for example, /var/lib/dhcpd or /var/run has not yet been mounted when the DHCP client is started.

    The DHCP client normally exits if it isn't able to identify any network interfaces to configure. On laptop computers and other computers with hot-swappable I/O buses, it is possible that a broadcast interface may be added after system startup. The -w flag can be used to cause the client not to exit when it doesn't find any such interfaces. The omshell (1) program can then be used to notify the client when a network interface has been added or removed, so that the client can attempt to configure an IP address on that interface.

    The DHCP client can be directed not to attempt to configure any interfaces using the -n flag. This is most likely to be useful in combination with the -w flag.

    The client can also be instructed to become a daemon immediately, rather than waiting until it has acquired an IP address. This can be done by supplying the -nw flag.

    The -x argument enables extended option information to be created in the -s dhclient-script environment, which would allow applications running in that environment to handle options they do not know about in advance - this is a Red Hat extension to support dhcdbd and NetworkManager.

    The -I <id> argument allows you to specify the dhcp-client-identifier string, <id>, to be sent to the dhcp server on the command line. It is equivalent to the top level dhclient.conf statement:

     send dhcp-client-identifier "<id>";
    The -I <id> command line option will override any top level dhclient.conf
     'send dhcp-client-identifier' statement, but more specific per-interface
     'interface "X" { send dhcp-client-identifier...; }' statements in dhclient.conf will override the -I <id> command line option for interface "X". This option is provided as a Red Hat extension to enable dhclient to work on IBM zSeries z/OS Linux guests.

    The -B option instructs dhclient to set the bootp broadcast flag in request packets, so that servers will always broadcast replies. This is equivalent to specifying the 'bootp-broadcast-always' option in dhclient.conf, and has the same effect as specifying 'always-broadcast' in the server's dhcpd.conf. This option is provided as a Red Hat extension to enable dhclient to work on IBM zSeries z/OS Linux guests.

    The -H <host-name> option allows you to specify the DHCP host-name option to send to the server on the dhclient command line. It is equivalent to the top level dhclient.conf statement:
    send host-name "<host-name>";
    The -H <host-name> option will override any top level dhclient.conf
     'send host-name' statement, but more specific per-interface 
     'interface "X" { send host-name...;' statements in dhclient.conf will override the -H <host-name> command line option for interface "X". The host-name option only specifies the client's host name prefix, to which the server will append the 'ddns-domainname' or 'domain-name' options, if any, to derive the fully qualified domain name of the client host. The -H <host-name> option cannot be used with the -F <fqdn.fqdn> option. Only one -H <host-name> option may be specified. The -H <host-name> option is provided as a Red Hat extension to simplify configuration of clients of DHCP servers that require the host-name option to be sent (eg. some modern cable modems), and for dynamic DNS updates (DDNS).

    The -F <fqdn.fqdn> option allows you to specify the DHCP fqdn.fqdn option to send to the server on the dhclient command line. It is equivalent to the top level dhclient.conf statement:
    send fqdn.fqdn "<domain-name>";
    The -F <fqdn.fqdn> option will override any top level dhclient.conf
     'send fqdn.fqdn' statement, but more specific per-interface 
     'interface "X" { send fqdn.fqdn...;' statements in dhclient.conf will override the -F <fqdn.fqdn> command line option for interface "X". This option cannot be used with the -H <host-name> option. The DHCP fqdn.fqdn option must specify the complete domain name of the client host, which the server may use for dynamic DNS updates. Only one -F <fqdn.fqdn> option may be specified. The -F <fqdn.fqdn> option is provided as a Red Hat extension to simplify configuration of DDNS.

    The -T <timeout> option allows you to specify the time after which the dhclient will decide that no DHCP servers can be contacted when no responses have been received. It is equivalent to the
    timeout <integer>;
    dhclient.conf statement, and will override any such statements in dhclient.conf.
    This option is provided as a Red Hat extension.

    The -V <vendor-class-identifier> option allows you to specify the DHCP vendor-class-identifier option to send to the server on the dhclient command line. It is equivalent to the top level dhclient.conf statement:
    send vendor-class-identifier "<vendor-class-identifier>";
    The -V <vendor-class-identifier> option will override any top level dhclient.conf
     'send vendor-class-identifier' statement, but more specific per-interface 
     'interface "X" { send vendor-class-identifier...;' statements in dhclient.conf will override the -V <vendor-class-identifier> command line option for interface "X". The -V <vendor-class-identifier> option is provided as a Red Hat extension to simplify configuration of clients of DHCP servers that require the vendor-class-identifier option to be sent.

    The -R <request option list> option allows you to specify the list of options the client is to request from the server on the dhclient command line. The option list must be a single string, consisting of option names separated by at least one comma and optional space characters. The default option list is :

        subnet-mask, broadcast-address, time-offset, routers, 

        domain-name, domain-name-servers, host-name, nis-domain, 

        nis-servers, ntp-servers
    You can specify a different list of options to request with the -R <option list> argument. This is equivalent to the dhclient.conf statement:
    request <option list> ;
    The -R argument is provided as a Red Hat extension to ISC dhclient to facilitate requesting a list of options from the server different to the default.

     

    CONFIGURATION

    The syntax of the dhclient.conf(5) file is discussed separately.  

    OMAPI

    The DHCP client provides some ability to control it while it is running, without stopping it. This capability is provided using OMAPI, an API for manipulating remote objects. OMAPI clients connect to the client using TCP/IP, authenticate, and can then examine the client's current status and make changes to it.

    Rather than implementing the underlying OMAPI protocol directly, user programs should use the dhcpctl API or OMAPI itself. Dhcpctl is a wrapper that handles some of the housekeeping chores that OMAPI does not do automatically. Dhcpctl and OMAPI are documented in dhcpctl(3) and omapi(3). Most things you'd want to do with the client can be done directly using the omshell(1) command, rather than having to write a special program.  

    THE CONTROL OBJECT

    The control object allows you to shut the client down, releasing all leases that it holds and deleting any DNS records it may have added. It also allows you to pause the client - this unconfigures any interfaces the client is using. You can then restart it, which causes it to reconfigure those interfaces. You would normally pause the client prior to going into hibernation or sleep on a laptop computer. You would then resume it after the power comes back. This allows PC cards to be shut down while the computer is hibernating or sleeping, and then reinitialized to their previous state once the computer comes out of hibernation or sleep.

    The control object has one attribute - the state attribute. To shut the client down, set its state attribute to 2. It will automatically do a DHCPRELEASE. To pause it, set its state attribute to 3. To resume it, set its state attribute to 4.

     

    FILES

    /sbin/dhclient-script, /etc/dhclient.conf, /var/lib/dhcpd/dhclient.leases, /var/run/dhclient.pid, /var/lib/dhcpd/dhclient.leases~.  

    SEE ALSO

    dhcpd(8), dhcrelay(8), dhclient-script(8), dhclient.conf(5), dhclient.leases(5).  

    AUTHOR

    dhclient(8) has been written for Internet Systems Consortium by Ted Lemon in cooperation with Vixie Enterprises. To learn more about Internet Systems Consortium, see http://www.isc.org To learn more about Vixie Enterprises, see http://www.vix.com.

    This client was substantially modified and enhanced by Elliot Poger for use on Linux while he was working on the MosquitoNet project at Stanford.

    The current version owes much to Elliot's Linux enhancements, but was substantially reorganized and partially rewritten by Ted Lemon so as to use the same networking framework that the Internet Systems Consortium DHCP server uses. Much system-specific configuration code was moved into a shell script so that as support for more operating systems is added, it will not be necessary to port and maintain system-specific configuration code to these operating systems - instead, the shell script can invoke the native tools to accomplish the same purpose.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    OPERATION
    COMMAND LINE
    CONFIGURATION
    OMAPI
    THE CONTROL OBJECT
    FILES
    SEE ALSO
    AUTHOR


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру