Добрый день пытаюсь настроить поток E1 на Кошке 2951
При создании на кон-ре Е1 pri-group timeslots 1-31 пишет что недостаточно ресурсов DSP

% Not enough DSP resources available to configure pri-group on controller E1 0/0/0
% The remaining dsp resources are enough for 28 time slots.
% For current codec complexity, 1 extra 16 channel dsp(s) are required to create this voice port.
Не могу понять как надо накрутить PVDM чтобы все заработало
=========================================================================================
Cisco2951#sh inventory
NAME: "CISCO2951/K9 chassis", DESCR: "CISCO2951/K9 chassis"
PID: CISCO2951/K9      , VID: V03 , SN: =======

NAME: "VWIC2-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0 SubSlot 0", DESCR: "VWIC2-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1"
PID: VWIC2-1MFT-T1/E1  , VID: V01 , SN: FOC14376UW3

NAME: "3rd generation four port FXS DID voice interface daughtercard on Slot 0 SubSlot 1", DESCR: "3rd generation four port FXS DID voice interface daughtercard"
PID: VIC3-4FXS/DID     , VID: V02 , SN: FOC13391ZYK

NAME: "PVDM3 DSP DIMM with 32 Channels on Slot 0 SubSlot 4", DESCR: "PVDM3 DSP DIMM with 32 Channels"
PID: PVDM3-32          , VID: V01 , SN: FOC150542US

NAME: "C2921/C2951 AC Power Supply", DESCR: "C2921/C2951 AC Power Supply"
PID: PWR-2921-51-AC    , VID: V02 , SN: DCA1507K161
=========================================================================================
Все понял, плата на 4 аналоговых порта забирала на себя 4 тайм слота, будем теперь знать =)