Здравствуйте!
Есть такое TrixBox 2.8 но нет исходяцих
Ответы системы

CLI> sip show registry
Host                            Username       Refresh State                Reg.Time
sip.xs4all.nl:5060              0104155xxx         105 Registered           Tue, 19 Mar 2013 11:52:24
1 SIP registrations.

trixbox1*CLI> sip show peer 103
trixbox1*CLI>

  * Name       : 103
  Secret       : <Set>
  MD5Secret    : <Not set>
  Context      : from-internal
  Subscr.Cont. : <Not set>
  Language     :
  AMA flags    : Unknown
  Transfer mode: open
  CallingPres  : Presentation Allowed, Not Screened
  Callgroup    :
  Pickupgroup  :
  Mailbox      : 103@device
  VM Extension : *97
  LastMsgsSent : 32767/65535
  Call limit   : 50
  Dynamic      : Yes
  Callerid     : "device" <103>
  MaxCallBR    : 384 kbps
  Expire       : 2792
  Insecure     : no
  Nat          : No
  ACL          : Yes
  T.38 support : No
  T.38 EC mode : Unknown
  T.38 MaxDtgrm: -1
  CanReinvite  : No
  PromiscRedir : No
  User=Phone   : No
  Video Support: Yes
  Text Support : No
  Ign SDP ver  : No
  Trust RPID   : No
  Send RPID    : No
  Subscriptions: Yes
  Overlap dial : Yes
  DTMFmode     : rfc2833
  Timer T1     : 500
  Timer B      : 32000
  ToHost       :
  Addr->IP     : 192.168.1.163 Port 5061
  Defaddr->IP  : 0.0.0.0 Port 5060
  Transport    : UDP
  Def. Username: 103
  SIP Options  : (none)
  Codecs       : 0x28000c (ulaw|alaw|h263|h264)
  Codec Order  : (ulaw:20,alaw:20)
  Auto-Framing :  No
  100 on REG   : No
  Status       : OK (112 ms)
  Useragent    : Cisco-CP7940G/8.0
  Reg. Contact : sip:103@192.168.1.163:5061;transport=udp
  Qualify Freq : 60000 ms
  Sess-Timers  : Accept
  Sess-Refresh : uas
  Sess-Expires : 1800 secs
  Min-Sess     : 90 secs

CLI>  sip show settings
trixbox1*CLI>

Global Settings:
----------------
  UDP SIP Port:           5060
  UDP Bindaddress:        0.0.0.0
  TCP SIP Port:           Disabled
  TLS SIP Port:           Disabled
  Videosupport:           Yes
  Textsupport:            No
  AutoCreate Peer:        No
  Ignore SDP sess. ver.:  No
  Match Auth Username:    No
  Allow unknown access:   Yes
  Allow subscriptions:    Yes
  Allow overlap dialing:  Yes
  Allow promsic. redir:   No
  Enable call counters:   No
  SIP domain support:     No
  Realm. auth:            No
  Our auth realm          asterisk
  Call to non-local dom.: Yes
  URI user is phone no:   No
  Always auth rejects:    Yes
  Call limit peers only:  Yes
  Direct RTP setup:       No
  User Agent:             Asterisk PBX 1.6.0.26-FONCORE-r78
  SDP Session Name:       Asterisk PBX 1.6.0.26-FONCORE-r78
  SDP Owner Name:         root
  Reg. context:           (not set)
  Regexten on Qualify:    No
  Caller ID:              Unknown
  From: Domain:
  Record SIP history:     Off
  Call Events:            Off
  T.38 support:           No
  T.38 EC mode:           Unknown
  T.38 MaxDtgrm:          -1
  SIP realtime:           Disabled
  Qualify Freq :          60000 ms
trixbox1*CLI>
Network QoS Settings:
---------------------------
  IP ToS SIP:             CS3
  IP ToS RTP audio:       EF
  IP ToS RTP video:       AF41
  IP ToS RTP text:        CS0
  802.1p CoS SIP:         4
  802.1p CoS RTP audio:   5
  802.1p CoS RTP video:   6
  802.1p CoS RTP text:    5
  Jitterbuffer enabled:   No
  Jitterbuffer forced:    No
  Jitterbuffer max size:  -1
  Jitterbuffer resync:    -1
  Jitterbuffer impl:
  Jitterbuffer log:       No
trixbox1*CLI>
Network Settings:
---------------------------
  SIP address remapping:  Disabled, no localnet list
  Externhost:             <none>
  Externip:               0.0.0.0:0
  Externrefresh:          10
  Internal IP:            127.0.0.1:5060
  STUN server:            0.0.0.0:0
trixbox1*CLI>
Global Signalling Settings:
---------------------------
  Codecs:                 0x28000c (ulaw|alaw|h263|h264)
  Codec Order:            ulaw:20,alaw:20
  Relax DTMF:             No
  RFC2833 Compensation:   No
  Compact SIP headers:    No
  RTP Keepalive:          0 (Disabled)
  RTP Timeout:            0 (Disabled)
  RTP Hold Timeout:       0 (Disabled)
  MWI NOTIFY mime type:   application/simple-message-summary
  DNS SRV lookup:         Yes
  Pedantic SIP support:   No
  Reg. min duration       60 secs
  Reg. max duration:      3600 secs
  Reg. default duration:  120 secs
  Outbound reg. timeout:  20 secs
  Outbound reg. attempts: 0
  Notify ringing state:   Yes
  Notify hold state:      Yes
  SIP Transfer mode:      open
  Max Call Bitrate:       384 kbps
  Auto-Framing:           No
  Outb. proxy:            <not set>
  Session Timers:         Accept
  Session Refresher:      uas
  Session Expires:        1800 secs
  Session Min-SE:         90 secs
  Timer T1:               500
  Timer T1 minimum:       100
  Timer B:                32000
  No premature media:     No
trixbox1*CLI>
Default Settings:
-----------------
  Context:                from-sip-external
  Nat:                    RFC3581
  DTMF:                   rfc2833
  Qualify:                0
  Use ClientCode:         No
  Progress inband:        Never
  Language:
  MOH Interpret:          default
  MOH Suggest:
  Voice Mail Extension:   *97

LOG при звонке в мир
== Using SIP RTP TOS bits 184
  == Using SIP RTP CoS mark 5
  == Using SIP VRTP TOS bits 136
  == Using SIP VRTP CoS mark 6
    -- Executing [0626237794@from-internal:1] Macro("SIP/103-00000040", "user-callerid,SKIPTTL,") in new stack
    -- Executing [s@macro-user-callerid:1] Set("SIP/103-00000040", "AMPUSER=103") in new stack
    -- Executing [s@macro-user-callerid:2] GotoIf("SIP/103-00000040", "0?report") in new stack
    -- Executing [s@macro-user-callerid:3] ExecIf("SIP/103-00000040", "1?Set(REALCALLERIDNUM=103)") in new stack
    -- Executing [s@macro-user-callerid:4] Set("SIP/103-00000040", "AMPUSER=103") in new stack
    -- Executing [s@macro-user-callerid:5] Set("SIP/103-00000040", "AMPUSERCIDNAME=103") in new stack
    -- Executing [s@macro-user-callerid:6] GotoIf("SIP/103-00000040", "0?report") in new stack
    -- Executing [s@macro-user-callerid:7] Set("SIP/103-00000040", "AMPUSERCID=103") in new stack
    -- Executing [s@macro-user-callerid:8] Set("SIP/103-00000040", "CALLERID(all)="103" <103>") in new stack
    -- Executing [s@macro-user-callerid:9] ExecIf("SIP/103-00000040", "0?Set(CHANNEL(language)=)") in new stack
    -- Executing [s@macro-user-callerid:10] GotoIf("SIP/103-00000040", "1?continue") in new stack
    -- Goto (macro-user-callerid,s,19)
    -- Executing [s@macro-user-callerid:19] NoOp("SIP/103-00000040", "Using CallerID "103" <103>") in new stack
    -- Executing [0626237794@from-internal:2] Set("SIP/103-00000040", "_NODEST=") in new stack
    -- Executing [0626237794@from-internal:3] Macro("SIP/103-00000040", "record-enable,103,OUT,") in new stack
    -- Executing [s@macro-record-enable:1] GotoIf("SIP/103-00000040", "1?check") in new stack
    -- Goto (macro-record-enable,s,4)
    -- Executing [s@macro-record-enable:4] AGI("SIP/103-00000040", "recordingcheck,20130319-115825,1363690705.64") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck,20130319-115825,1363690705.64: Outbound recording not enabled
    -- <SIP/103-00000040>AGI Script recordingcheck completed, returning 0
    -- Executing [s@macro-record-enable:5] MacroExit("SIP/103-00000040", "") in new stack
    -- Executing [0626237794@from-internal:4] Macro("SIP/103-00000040", "dialout-trunk,2,0626237794,,") in new stack
    -- Executing [s@macro-dialout-trunk:1] Set("SIP/103-00000040", "DIAL_TRUNK=2") in new stack
    -- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/103-00000040", "0?sub-pincheck,s,1") in new stack
    -- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/103-00000040", "0?disabletrunk,1") in new stack
    -- Executing [s@macro-dialout-trunk:4] Set("SIP/103-00000040", "DIAL_NUMBER=0626237794") in new stack
    -- Executing [s@macro-dialout-trunk:5] Set("SIP/103-00000040", "DIAL_TRUNK_OPTIONS=tr") in new stack
    -- Executing [s@macro-dialout-trunk:6] Set("SIP/103-00000040", "OUTBOUND_GROUP=OUT_2") in new stack
    -- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/103-00000040", "0?nomax") in new stack
    -- Executing [s@macro-dialout-trunk:8] GotoIf("SIP/103-00000040", "0?chanfull") in new stack
    -- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/103-00000040", "0?skipoutcid") in new stack
    -- Executing [s@macro-dialout-trunk:10] Set("SIP/103-00000040", "DIAL_TRUNK_OPTIONS=") in new stack
    -- Executing [s@macro-dialout-trunk:11] Macro("SIP/103-00000040", "outbound-callerid,2") in new stack
    -- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/103-00000040", "0?Set(CALLERPRES()=)") in new stack
    -- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/103-00000040", "0?Set(REALCALLERIDNUM=103)") in new stack
    -- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/103-00000040", "1?normcid") in new stack
    -- Goto (macro-outbound-callerid,s,6)
    -- Executing [s@macro-outbound-callerid:6] Set("SIP/103-00000040", "USEROUTCID=103") in new stack
    -- Executing [s@macro-outbound-callerid:7] Set("SIP/103-00000040", "EMERGENCYCID=") in new stack
    -- Executing [s@macro-outbound-callerid:8] Set("SIP/103-00000040", "TRUNKOUTCID=0104155155") in new stack
    -- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/103-00000040", "1?trunkcid") in new stack
    -- Goto (macro-outbound-callerid,s,12)
    -- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/103-00000040", "1?Set(CALLERID(all)=0104155155)") in new stack
    -- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/103-00000040", "1?Set(CALLERID(all)=103)") in new stack
    -- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/103-00000040", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack
    -- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/103-00000040", "1?AGI(fixlocalprefix)") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
    -- <SIP/103-00000040>AGI Script fixlocalprefix completed, returning 0
    -- Executing [s@macro-dialout-trunk:13] Set("SIP/103-00000040", "OUTNUM=0626237794") in new stack
    -- Executing [s@macro-dialout-trunk:14] Set("SIP/103-00000040", "custom=SIP/x_155") in new stack
    -- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/103-00000040", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^))") in new stack
    -- Executing [s@macro-dialout-trunk:16] Macro("SIP/103-00000040", "dialout-trunk-predial-hook,") in new stack
    -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/103-00000040", "") in new stack
    -- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/103-00000040", "0?bypass,1") in new stack
    -- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/103-00000040", "0?customtrunk") in new stack
    -- Executing [s@macro-dialout-trunk:19] Dial("SIP/103-00000040", "SIP/x_155/0626237794,300,") in new stack
  == Using SIP RTP TOS bits 184
  == Using SIP RTP CoS mark 5
  == Using SIP VRTP TOS bits 136
  == Using SIP VRTP CoS mark 6
    -- Called x_155/0626237794
    -- SIP/x_155-00000041 is circuit-busy
  == Everyone is busy/congested at this time (1:0/1/0)
    -- Executing [s@macro-dialout-trunk:20] Goto("SIP/103-00000040", "s-CONGESTION,1") in new stack
    -- Goto (macro-dialout-trunk,s-CONGESTION,1)
    -- Executing [s-CONGESTION@macro-dialout-trunk:1] GotoIf("SIP/103-00000040", "1?noreport") in new stack
    -- Goto (macro-dialout-trunk,s-CONGESTION,3)
    -- Executing [s-CONGESTION@macro-dialout-trunk:3] NoOp("SIP/103-00000040", "TRUNK Dial failed due to CONGESTION - failing through to other trunks") in new stack
    -- Executing [0626237794@from-internal:5] Macro("SIP/103-00000040", "outisbusy,") in new stack
    -- Executing [s@macro-outisbusy:1] Playback("SIP/103-00000040", "all-circuits-busy-now,noanswer") in new stack
    -- <SIP/103-00000040> Playing 'all-circuits-busy-now.ulaw' (language 'en')
    -- Executing [s@macro-outisbusy:2] Playback("SIP/103-00000040", "pls-try-call-later,noanswer") in new stack
    -- <SIP/103-00000040> Playing 'pls-try-call-later.ulaw' (language 'en')
  == Spawn extension (macro-outisbusy, s, 2) exited non-zero on 'SIP/103-00000040' in macro 'outisbusy'
  == Spawn extension (from-internal, 0626237794, 5) exited non-zero on 'SIP/103-00000040'
    -- Executing [h@from-internal:1] Macro("SIP/103-00000040", "hangupcall") in new stack
    -- Executing [s@macro-hangupcall:1] GotoIf("SIP/103-00000040", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,4)
    -- Executing [s@macro-hangupcall:4] GotoIf("SIP/103-00000040", "1?skipblkvm") in new stack
    -- Goto (macro-hangupcall,s,7)
    -- Executing [s@macro-hangupcall:7] GotoIf("SIP/103-00000040", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,9)
    -- Executing [s@macro-hangupcall:9] Hangup("SIP/103-00000040", "") in new stack
  == Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'SIP/103-00000040' in macro 'hangupcall'
  == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/103-00000040'

Конфиг транка
host=sip.xs4all.nl
username=0104155ххх
secret=ххххххх
type=peer
outboundproxy=sip.xs4all.nl

Регистрация
register=0104155ххх:ххххххххх@sip.xs4all.nl

В какую сторону копать извелся весь -((((