форумы  помощь  поиск  регистрация  майллист  вход/выход  слежка

Вариант для распечатки		Пред. тема | След. тема
Форум Открытые системы на сервере (Др. сетевые сервисы / FreeBSD)
Изначальное сообщение		[ Отслеживать ]

"mpd4 + клиентв на linux"	+/–
Сообщение от weldpua2008 (ok) on 25-Фев-07, 23:09
Привет Всем Как прикрутить к mpd4{4.0b4, 4.1} - linux клиентов? Виндовс ХР нормально крутиться... Linux - конектится, поднимается ppp0... in 42byte out возростающее количество Мб вот конфиг mpd.conf: default:         load pptp0 pptp0:     new -i ng00 pptp0 pptp0     set ipcp ranges  10.11.25.1/24  192.168.11.1/32     load pptp_standart pptp_standart:     set iface route default     set iface disable on-demand     set bundle enable multilink     set link yes acfcomp protocomp     set iface up-script "/usr/local/etc/mpd4/link-up"     set iface down-script "/usr/local/etc/mpd4/link-down"     set link no pap chap     set link enable chap     set link keep-alive 30 60     set ipcp yes vjcomp     set ipcp dns 10.11.25.1     set ccp yes mppc     set ccp yes mpp-e40     set ccp yes mpp-e56     set ccp yes mpp-e128     set ccp yes mpp-stateless     set pptp enable incoming     set pptp disable originate     set radius me 127.0.0.1     set radius retries 2     set radius server 127.0.0.1 PASSWORD 1812 1813     set radius timeout 5     set auth acct-update 300     set auth enable radius-auth     set auth enable radius-acct
Ответить | Правка | Cообщить модератору

Сообщения по теме

[Сортировка по времени | RSS]

1. "mpd4 + клиентв на linux"	+/–
Сообщение от weldpua2008 (ok) on 25-Фев-07, 23:13
PPTP connection from 10.11.25.252 2308 pptp0: attached to connection with 10.11.25.252 2308 [pptp0] Accepting PPTP connection [pptp0] opening link "pptp0"... [pptp0] link: OPEN event [pptp0] LCP: Open event [pptp0] LCP: state change Initial --> Starting [pptp0] LCP: LayerStart [pptp0] attaching to peer's outgoing call [pptp0] link: UP event [pptp0] link: origination is remote [pptp0] LCP: Up event [pptp0] LCP: state change Starting --> Req-Sent [pptp0] LCP: SendConfigReq #1   ACFCOMP   PROTOCOMP    MRU 1500    MAGICNUM a8e39964    AUTHPROTO CHAP MSOFTv2    MP MRRU 1600    MP SHORTSEQ    ENDPOINTDISC [802.1] 00 11 2f a8 ce 0e   [pptp0] LCP: rec'd Configure Request #1 link 0 (Req-Sent)    ACCMAP 0x00000000    MAGICNUM 18971521   PROTOCOMP   ACFCOMP   [pptp0] LCP: SendConfigAck #1   ACCMAP 0x00000000   MAGICNUM 18971521   PROTOCOMP   ACFCOMP [pptp0] LCP: state change Req-Sent --> Ack-Sent [pptp0] LCP: rec'd Configure Reject #1 link 0 (Ack-Sent) MP MRRU 1600 MP SHORTSEQ [pptp0] LCP: SendConfigReq #2   ACFCOMP   PROTOCOMP MRU 1500   MAGICNUM a8e39964 AUTHPROTO CHAP MSOFTv2 [pptp0] LCP: SendConfigReq #3   ACFCOMP   PROTOCOMP   MRU 1500   MAGICNUM a8e39964   AUTHPROTO CHAP MSOFTv2 [pptp0] LCP: rec'd Configure Ack #3 link 0 (Ack-Sent)   ACFCOMP   PROTOCOMP    MRU 1500   MAGICNUM a8e39964   AUTHPROTO CHAP MSOFTv2 [pptp0] LCP: state change Ack-Sent --> Opened [pptp0] LCP: auth: peer wants nothing, I want CHAP   [pptp0] CHAP: sending CHALLENGE len:17   [pptp0] LCP: LayerUp [pptp0] CHAP: rec'd RESPONSE #1   Name: "nemo" [pptp0] AUTH: Auth-Thread started   [pptp0] AUTH: Trying RADIUS   [pptp0] RADIUS: RadiusAuthenticate for: nemo   [pptp0] RADIUS: rec'd RAD_ACCESS_ACCEPT for user nemo [pptp0] AUTH: RADIUS returned authenticated   [pptp0] AUTH: Auth-Thread finished normally   [pptp0] CHAP: ChapInputFinish: status authenticated   [pptp0] CHAP: sending SUCCESS len:42 [pptp0] LCP: authorization successful [pptp0] Bundle up: 1 link, total bandwidth 64000 bps   [pptp0] IPCP: Open event [pptp0] IPCP: state change Initial --> Starting [pptp0] IPCP: LayerStart   [pptp0] IPCP: Up event   [pptp0] IPCP: state change Starting --> Req-Sent   [pptp0] IPCP: SendConfigReq #1    IPADDR 10.11.25.1    COMPPROTO VJCOMP, 16 comp. channels, no comp-cid   [pptp0] IPCP: rec'd Configure Request #1 link 0 (Req-Sent)    COMPPROTO VJCOMP, 16 comp. channels, allow comp-cid    IPADDR 0.0.0.0      NAKing with 192.168.12.1   [pptp0] IPCP: SendConfigNak #1    IPADDR 192.168.12.1   [pptp0] IPCP: rec'd Configure Ack #1 link 0 (Req-Sent)    IPADDR 10.11.25.1    COMPPROTO VJCOMP, 16 comp. channels, no comp-cid   [pptp0] IPCP: state change Req-Sent --> Ack-Rcvd   [pptp0] IPCP: rec'd Configure Request #2 link 0 (Ack-Rcvd)    COMPPROTO VJCOMP, 16 comp. channels, allow comp-cid   IPADDR 192.168.12.1      192.168.12.1 is OK   [pptp0] IPCP: SendConfigAck #2    COMPPROTO VJCOMP, 16 comp. channels, allow comp-cid   IPADDR 192.168.12.1   [pptp0] IPCP: state change Ack-Rcvd --> Opened [pptp0] IPCP: LayerUp     10.11.25.1 -> 192.168.12.1 [pptp0] AUTH: Accounting-Thread started [pptp0] RADIUS: RadiusAccount for: nemo (Type: 1) [pptp0] RADIUS: rec'd RAD_ACCOUNTING_RESPONSE for user nemo   [pptp0] no interface to proxy arp on for 192.168.12.1 [pptp0] IFACE: Up event [pptp0] AUTH: Accounting-Thread finished normally   pptp0-0: call cleared by peer   pptp0-0: killing channel   [pptp0] PPTP call terminated   pptp0: closing connection with 10.11.25.252 2308   pptp0: read: Connection reset by peer   pptp0: killing connection with 10.11.25.252 2308   [pptp0] link: DOWN event   [pptp0] LCP: Close event   [pptp0] LCP: state change Opened --> Closing   [pptp0] AUTH: Accounting data for user nemo: 23 seconds, 189 octets in, 2octets out   [pptp0] AUTH: Cleanup   [pptp0] Bundle up: 0 links, total bandwidth 9600 bps [pptp0] IPCP: Close event [pptp0] IPCP: state change Opened --> Closing [pptp0] IPCP: SendTerminateReq #2   [pptp0] error writing len 8 frame to bypass: Network is down   [pptp0] IPCP: LayerDown   [pptp0] AUTH: Accounting-Thread started   [pptp0] RADIUS: RadiusAccount for: nemo (Type: 2)   [pptp0] RADIUS: Termination cause: Dropped, RADIUS: 2   [pptp0] RADIUS: rec'd RAD_ACCOUNTING_RESPONSE for user nemo   [pptp0] IFACE: Down event [pptp0] IPCP: Down event [pptp0] IPCP: LayerFinish   [pptp0] No NCPs left. Closing links...   [pptp0] closing link "pptp0"...   [pptp0] IPCP: state change Closing --> Initial [pptp0] LCP: SendTerminateReq #4 [pptp0] error writing len 8 frame to bypass: Network is down [pptp0] LCP: LayerDown   [pptp0] LCP: Down event   [pptp0] LCP: LayerFinish [pptp0] LCP: state change Closing --> Initial   [pptp0] link: CLOSE event [pptp0] LCP: Close event   [pptp0] AUTH: Accounting-Thread finished normally
Ответить | Правка | ^ к родителю #0 | Наверх | Cообщить модератору

	2. "mpd4 + клиентв на linux"	+/–
	Сообщение от weldpua2008 (ok) on 26-Фев-07, 14:19
	HELP ME
	Ответить | Правка | ^ к родителю #1 | Наверх | Cообщить модератору

	3. "mpd4 + клиентв на linux"	+/–
	Сообщение от weldpua2008 (ok) on 27-Фев-07, 01:18
	>HELP ME Вот чего Я достиг: Конект нормальный: Debian 4.0 <--> FreeBSD6.2RC1+mpd4.1 но Инета нет... Вешаю : tcpdump -i ng0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on ng0, link-type NULL (BSD loopback), capture size 96 bytes 23:47:59.471504 IP k152-XX.saltov.net > ya.ru: ICMP echo request, id 53259, seq 16, length 64 23:48:00.471208 IP k152-XX.saltov.net > ya.ru: ICMP echo request, id 53259, seq 17, length 64 23:48:01.471045 IP k152-XX.saltov.net > ya.ru: ICMP echo request, id 53259, seq 18, length 64 mpd.conf: pptp100:         new -i ng100 pptp100 pptp100         set ipcp ranges 192.168.11.1/32 192.168.11.101/32         load pptp_standart pptp_standart:     set pptp disable windowing     set iface route default     set iface disable on-demand     #     set iface enable tcpmssfix     #     set bundle disable multilink     set link yes acfcomp protocomp     set iface up-script "/usr/local/etc/mpd4/link-up"     set iface down-script "/usr/local/etc/mpd4/link-down"     set link no pap chap     set link enable chap     set link keep-alive 10 75     set ipcp yes vjcomp     set ipcp dns 10.11.25.1 #    set link mtu 1460 #    set link mru 1460     set iface enable proxy-arp     set bundle enable compression     set ccp yes mppc     set ccp yes mpp-e40 #    set ccp yes mpp-e56     set ccp yes mpp-e128     set ccp yes mpp-stateless     set pptp enable incoming     set pptp disable originate #   set radius config /opt/radius.conf     set radius me 127.0.0.1     set radius retries 2     set radius server 127.0.0.1 password 1812 1813     set radius timeout 5     set auth acct-update 300     set auth enable radius-auth     set auth enable radius-acct #    set ipcp yes radius-ip #   set iface route mpd.links: pptp100:         set link type pptp Конект есть, а Инета нету :(
	Ответить | Правка | ^ к родителю #2 | Наверх | Cообщить модератору

	4. "mpd4 + клиентв на linux"	+/–
	Сообщение от weldpua2008 (ok) on 27-Фев-07, 08:47
	Проверяюна винде - все ОК..
	Ответить | Правка | ^ к родителю #3 | Наверх | Cообщить модератору

	5. "mpd4 + клиентв на linux"	+/–
	Сообщение от mmihail on 20-Янв-11, 13:09
	> Проверяюна винде - все ОК.. default route проверь после коннекта наверняка не меняешь просто
	Ответить | Правка | ^ к родителю #4 | Наверх | Cообщить модератору

	6. "mpd4 + клиентв на linux"	+/–
	Сообщение от weldpua2008 (ok) on 20-Янв-11, 20:38
	>> Проверяюна винде - все ОК.. > default route проверь после коннекта наверняка не меняешь просто некрофил)))
	Ответить | Правка | ^ к родителю #5 | Наверх | Cообщить модератору

Архив | Удалить

Рекомендовать для помещения в FAQ | Индекс форумов | Темы | Пред. тема | След. тема