форумы  помощь  поиск  регистрация  майллист  ВХОД  слежка

Вариант для распечатки		Пред. тема | След. тема
Форумы OpenNET: Виртуальная конференция (Public)
Изначальное сообщение		[Проследить за развитием треда]

"Подключение к Стрим'у"
Сообщение от ugoday on 19-Ноя-05, 17:21  (MSK)
Есть модем zyxel omni adsl lan, стоящий на уединённом (невключенном ни в какие сети) компе. Есть статья https://www.opennet.ru/base/modem/OmniLanEELinux.txt.html, в который описываются способ подключения к стриму. Делаю. 0. жму ресет на модеме. 1. опускаю интерфейс eth0 # ifconfig eth0 down 2. поднимаю интерфейс eth0 # ifconfig eth0 up 3. назначаю адреса ~ugoday# dhcpcd -dnCRYN eth0 dhcpcd: MAC address = 00:05:1c:0f:ff:8d dhcpcd: your IP address = 192.163.1.32 ~ugoday# dhcpcd.exe: interface eth0 has been configured with old IP=192.163.1.32 4. добавляю роутинг ~ugoday#  route add default gw  192.163.1.32 eth0 SIOCADDRT: File exists 5. захожу в модем ~ugoday# telnet 192.163.1.33        Menu 3.2 - TCP/IP and DHCP Setup                     DHCP Setup                       DHCP= Server                       Client IP Pool Starting Address= 192.163.1.32                       Size of Client IP Pool= 1                       Primary DNS Server= 212.188.4.10                       Secondary DNS Server= 195.34.32.116                       Remote DHCP Server= N/A                     TCP/IP Setup:                       IP Address= 192.163.1.33                       IP Subnet Mask= 255.255.255.0                       RIP Direction= Both                         Version= RIP-2B                       Multicast= None                       IP Policies=                       Edit IP Alias= No                     Press ENTER to Confirm or ESC to Cancel:         Menu 4 - Internet Access Setup                     ISP's Name= stream                     Encapsulation= PPPoE                     Multiplexing= LLC-based                     VPI #= 1                     VCI #= 50                     ATM QoS Type= UBR                       Peak Cell Rate (PCR)= 0                       Sustain Cell Rate (SCR)= 0                       Maximum Burst Size (MBS)= 0                     My Login= ppp0******@mtu                     My Password= ********                     Idle Timeout (sec)= 0                     IP Address Assignment= Dynamic                       IP Address= N/A                     Network Address Translation= SUA Only                       Address Mapping Set= N/A                     Press ENTER to Confirm or ESC to Cancel:                        Menu 11.1 - Remote Node Profile      Rem Node Name= stream                Route= IP      Active= Yes                          Bridge= No      Encapsulation= PPPoE                 Edit IP/Bridge= No      Multiplexing= LLC-based              Edit ATM Options= No      Service Name=      Incoming:                            Telco Option:        Rem Login=                           Allocated Budget(min)= 0        Rem Password= ********               Period(hr)= 0      Outgoing:                              Schedule Sets=        My Login= ppp0******@mtu             Nailed-Up Connection= Yes        My Password= ********              Session Options:        Authen= CHAP/PAP                     Edit Filter Sets= No                                             Idle Timeout(sec)= N/A                     Press ENTER to Confirm or ESC to Cancel: 6. выхожу из модема Connection closed by foreign host. 7. пытаюсь пропинговаться ~ugoday# ping opennet.ru                         ping: unknown host opennet.ru 8. Вопрос: где я накосячил и как это безобразие исправить?
	Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

Сообщения по теме

[Сортировка по времени, UBB]

1. "Подключение к Стрим'у"
Сообщение от ugoday on 20-Ноя-05, 10:30  (MSK)
На лоре сделали такую подсказку: "Диапазон сетей 192.163.1.0 netmask 255.255.255.0 принадлежит Texas Instruments В вашем случае должно быть 192.168.1.32 и 192.168.1.33". Не помогло. Делаю так: 1. /home/ugoday# ifconfig eth0 down   2. /home/ugoday# ifconfig eth0 up   3. /home/ugoday# dhcpcd -dnCRYN eth0 dhcpcd: MAC address = 00:05:1c:0f:ff:8d dhcpcd: your IP address = 192.168.1.32 /home/ugoday# dhcpcd.exe: interface eth0 has been configured with old IP=192.168.1.32 4. /home/ugoday#  route add default gw  192.168.1.32 eth0 5. ~% telnet 192.168.1.33                         Menu 3.2 - TCP/IP and DHCP Setup                     DHCP Setup                       DHCP= Server                       Client IP Pool Starting Address= 192.168.1.32                       Size of Client IP Pool= 1                       Primary DNS Server= 212.188.4.10                       Secondary DNS Server= 195.34.32.116                       Remote DHCP Server= N/A                     TCP/IP Setup:                       IP Address= 192.168.1.33                       IP Subnet Mask= 255.255.255.0                       RIP Direction= Both                         Version= RIP-2B                       Multicast= None                       IP Policies=                       Edit IP Alias= No                     Press ENTER to Confirm or ESC to Cancel:           Menu 4 - Internet Access Setup                     ISP's Name= stream                     Encapsulation= PPPoE                     Multiplexing= LLC-based                     VPI #= 1                     VCI #= 50                     ATM QoS Type= UBR                       Peak Cell Rate (PCR)= 0                       Sustain Cell Rate (SCR)= 0                       Maximum Burst Size (MBS)= 0                     My Login= ppp0401394@mtu                     My Password= ********                     Idle Timeout (sec)= 0                     IP Address Assignment= Dynamic                       IP Address= N/A                     Network Address Translation= SUA Only                       Address Mapping Set= N/A                     Press ENTER to Confirm or ESC to Cancel:                          Menu 11.1 - Remote Node Profile      Rem Node Name= stream                Route= IP      Active= Yes                          Bridge= No      Encapsulation= PPPoE                 Edit IP/Bridge= No      Multiplexing= LLC-based              Edit ATM Options= No      Service Name=      Incoming:                            Telco Option:        Rem Login=                           Allocated Budget(min)= 0        Rem Password= ********               Period(hr)= 0      Outgoing:                              Schedule Sets=        My Login= ppp0401394@mtu             Nailed-Up Connection= Yes        My Password= ********              Session Options:        Authen= CHAP/PAP                     Edit Filter Sets= No                                             Idle Timeout(sec)= N/A                     Press ENTER to Confirm or ESC to Cancel: 6. ~% ping google.com ping: unknown host google.com
Удалить	Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

Архив | Удалить	Индекс форумов | Темы | Пред. тема | След. тема
Оцените тред (1=ужас, 5=супер)? [ 1 | 2 | 3 | 4 | 5 ]