The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]



Индекс форумов
Составление сообщения

Исходное сообщение
"Не работает динамическая маршрутизация на 1700"
Отправлено rapport_mur, 04-Окт-10 10:25 
Извините, за долгое молчание.

Вот конфиги основного и резервного ответных маршрутизеров подключеных к Moxe:

Это первый (основной):

m8#sh ip proto
Routing Protocol is "ospf 1"
  Outgoing update filter list for all interfaces is not set
  Incoming update filter list for all interfaces is not set
  Router ID 192.169.140.9
  It is an autonomous system boundary router
  Redistributing External Routes from,
    static, includes subnets in redistribution
  Number of areas in this router is 1. 1 normal 0 stub 0 nssa
  Maximum path: 4
  Routing for Networks:
    172.30.64.32 0.0.0.15 area 0
    172.30.192.48 0.0.0.15 area 0
    172.30.252.0 0.0.0.3 area 0
    172.30.252.144 0.0.0.15 area 0
    172.30.252.160 0.0.0.31 area 0
    172.30.252.192 0.0.0.31 area 0
    172.30.252.224 0.0.0.7 area 0
    172.30.252.232 0.0.0.7 area 0
    192.169.3.20 0.0.0.3 area 0
    192.169.140.0 0.0.0.255 area 0
Reference bandwidth unit is 100 mbps
  Passive Interface(s):
    VoIP-Null0
...

m8#sh ip ospf int
FastEthernet0/0.5 is up, line protocol is up
  Internet Address 172.30.252.152/28, Area 0
  Process ID 1, Router ID 192.169.140.9, Network Type BROADCAST, Cost: 1
  Transmit Delay is 1 sec, State BDR, Priority 1
  Designated Router (ID) 192.169.140.8, Interface address 172.30.252.154
  Backup Designated router (ID) 192.169.140.9, Interface address 172.30.252.152
  Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
    oob-resync timeout 40
    Hello due in 00:00:05
  Supports Link-local Signaling (LLS)
  Index 4/4, flood queue length 0
  Next 0x0(0)/0x0(0)
  Last flood scan length is 1, maximum is 13
  Last flood scan time is 0 msec, maximum is 4 msec
  Neighbor Count is 1, Adjacent neighbor count is 1
    Adjacent with neighbor 192.169.140.8  (Designated Router)
  Suppress hello for 0 neighbor(s)
FastEthernet0/0.4 is up, line protocol is up
  Internet Address 172.30.252.233/29, Area 0
  Process ID 1, Router ID 192.169.140.9, Network Type BROADCAST, Cost: 1
  Transmit Delay is 1 sec, State BDR, Priority 1
  Designated Router (ID) 192.169.140.8, Interface address 172.30.252.234
  Backup Designated router (ID) 192.169.140.9, Interface address 172.30.252.233
  Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
    oob-resync timeout 40
    Hello due in 00:00:02
  Supports Link-local Signaling (LLS)
  Index 6/6, flood queue length 0
  Next 0x0(0)/0x0(0)
  Last flood scan length is 1, maximum is 12
  Last flood scan time is 0 msec, maximum is 4 msec
  Neighbor Count is 1, Adjacent neighbor count is 1
    Adjacent with neighbor 192.169.140.8  (Designated Router)
  Suppress hello for 0 neighbor(s)
FastEthernet0/1 is up, line protocol is up
  Internet Address 172.30.252.161/29, Area 0
  Process ID 1, Router ID 192.169.140.9, Network Type BROADCAST, Cost: 1
  Transmit Delay is 1 sec, State DR, Priority 1
  Designated Router (ID) 192.169.140.9, Interface address 172.30.252.161
  Backup Designated router (ID) 192.169.140.8, Interface address 172.30.252.162
  Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
    oob-resync timeout 40
    Hello due in 00:00:06
  Supports Link-local Signaling (LLS)
  Index 5/5, flood queue length 0
  Next 0x0(0)/0x0(0)
  Last flood scan length is 1, maximum is 13
  Last flood scan time is 0 msec, maximum is 4 msec
  Neighbor Count is 1, Adjacent neighbor count is 1
    Adjacent with neighbor 192.169.140.8  (Backup Designated Router)
  Suppress hello for 0 neighbor(s)
Serial0/1/0 is up, line protocol is up
  Internet Address 172.30.252.2/30, Area 0
  Process ID 1, Router ID 192.169.140.9, Network Type POINT_TO_POINT, Cost: 64
  Transmit Delay is 1 sec, State POINT_TO_POINT,
  Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
    oob-resync timeout 40
    Hello due in 00:00:04
  Supports Link-local Signaling (LLS)
  Index 3/3, flood queue length 0
  Next 0x0(0)/0x0(0)
  Last flood scan length is 9, maximum is 12
  Last flood scan time is 0 msec, maximum is 4 msec
  Neighbor Count is 1, Adjacent neighbor count is 1
    Adjacent with neighbor 192.168.4.1
  Suppress hello for 0 neighbor(s)
FastEthernet0/0.1 is up, line protocol is up
  Internet Address 172.30.192.49/28, Area 0
  Process ID 1, Router ID 192.169.140.9, Network Type BROADCAST, Cost: 1
  Transmit Delay is 1 sec, State DR, Priority 1
  Designated Router (ID) 192.169.140.9, Interface address 172.30.192.49
  Backup Designated router (ID) 192.169.140.8, Interface address 172.30.192.50
  Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
    oob-resync timeout 40
    Hello due in 00:00:07
  Supports Link-local Signaling (LLS)
  Index 2/2, flood queue length 0
  Next 0x0(0)/0x0(0)
  Last flood scan length is 1, maximum is 13
  Last flood scan time is 0 msec, maximum is 4 msec
  Neighbor Count is 1, Adjacent neighbor count is 1
    Adjacent with neighbor 192.169.140.8  (Backup Designated Router)
  Suppress hello for 0 neighbor(s)
FastEthernet0/0.2 is up, line protocol is up
  Internet Address 172.30.64.33/28, Area 0
  Process ID 1, Router ID 192.169.140.9, Network Type BROADCAST, Cost: 1
  Transmit Delay is 1 sec, State DR, Priority 1
  Designated Router (ID) 192.169.140.9, Interface address 172.30.64.33
  Backup Designated router (ID) 192.169.140.8, Interface address 172.30.64.34
  Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
    oob-resync timeout 40
    Hello due in 00:00:08
  Supports Link-local Signaling (LLS)
  Index 1/1, flood queue length 0
  Next 0x0(0)/0x0(0)
  Last flood scan length is 1, maximum is 13
  Last flood scan time is 0 msec, maximum is 4 msec
  Neighbor Count is 1, Adjacent neighbor count is 1
    Adjacent with neighbor 192.169.140.8  (Backup Designated Router)
  Suppress hello for 0 neighbor(s)


m8#debug ip ospf hell

Oct  4 06:08:21.602: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0.1 from 172.30.192.49
Oct  4 06:08:21.602: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0.2 from 172.30.64.33
Oct  4 06:08:22.182: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0.5 from 172.30.252.152
Oct  4 06:08:22.830: OSPF: Rcv hello from 192.169.140.8 area 0 from FastEthernet0/0.5 172.30.252.154
Oct  4 06:08:22.830: OSPF: End of hello processing
Oct  4 06:08:24.094: OSPF: Rcv hello from 192.169.140.8 area 0 from FastEthernet0/0.4 172.30.252.234
Oct  4 06:08:24.094: OSPF: End of hello processing
Oct  4 06:08:25.242: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/1 from 172.30.252.161
Oct  4 06:08:25.558: OSPF: Send hello to 224.0.0.5 area 0 on Serial0/1/0 from 172.30.252.2
Oct  4 06:08:27.126: OSPF: Rcv hello from 192.169.140.8 area 0 from FastEthernet0/0.1 172.30.192.50
Oct  4 06:08:27.126: OSPF: End of hello processing
Oct  4 06:08:27.126: OSPF: Rcv hello from 192.169.140.8 area 0 from FastEthernet0/0.2 172.30.64.34
Oct  4 06:08:27.126: OSPF: End of hello processing
Oct  4 06:08:28.574: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0.4 from 172.30.252.233
Oct  4 06:08:28.662: OSPF: Rcv hello from 192.169.140.8 area 0 from FastEthernet0/1 172.30.252.162
Oct  4 06:08:28.662: OSPF: End of hello processing
Oct  4 06:08:30.786: OSPF: Rcv hello from 192.168.4.1 area 0 from Serial0/1/0 172.30.252.1
Oct  4 06:08:30.786: OSPF: End of hello processing
Oct  4 06:08:31.602: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0.1 from 172.30.192.49
Oct  4 06:08:31.602: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0.2 from 172.30.64.33
Oct  4 06:08:32.182: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0.5 from 172.30.252.152
Oct  4 06:08:32.830: OSPF: Rcv hello from 192.169.140.8 area 0 from FastEthernet0/0.5 172.30.252.154
Oct  4 06:08:32.830: OSPF: End of hello processing
Oct  4 06:08:34.090: OSPF: Rcv hello from 192.169.140.8 area 0 from FastEthernet0/0.4 172.30.252.234
Oct  4 06:08:34.094: OSPF: End of hello processing
Oct  4 06:08:35.242: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/1 from 172.30.252.161
Oct  4 06:08:35.558: OSPF: Send hello to 224.0.0.5 area 0 on Serial0/1/0 from 172.30.252.2
Oct  4 06:08:37.123: OSPF: Rcv hello from 192.169.140.8 area 0 from FastEthernet0/0.1 172.30.192.50
Oct  4 06:08:37.127: OSPF: End of hello processing
Oct  4 06:08:37.127: OSPF: Rcv hello from 192.169.140.8 area 0 from FastEthernet0/0.2 172.30.64.34
Oct  4 06:08:37.127: OSPF: End of hello processing
Oct  4 06:08:38.575: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0.4 from 172.30.252.233
Oct  4 06:08:38.659: OSPF: Rcv hello from 192.169.140.8 area 0 from FastEthernet0/1 172.30.252.162
Oct  4 06:08:38.659: OSPF: End of hello processing
Oct  4 06:08:40.787: OSPF: Rcv hello from 192.168.4.1 area 0 from Serial0/1/0 172.30.252.1
Oct  4 06:08:40.787: OSPF: End of hello processing
Oct  4 06:08:41.603: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0.1 from 172.30.192.49
Oct  4 06:08:41.603: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0.2 from 172.30.64.33
Oct  4 06:08:42.183: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0.5 from 172.30.252.152
Oct  4 06:08:42.827: OSPF: Rcv hello from 192.169.140.8 area 0 from FastEthernet0/0.5 172.30.252.154
Oct  4 06:08:42.827: OSPF: End of hello processing


Вот второй (резервный):

m9#sh ip proto
Routing Protocol is "ospf 1"
  Outgoing update filter list for all interfaces is not set
  Incoming update filter list for all interfaces is not set
  Router ID 192.169.140.8
  Number of areas in this router is 1. 1 normal 0 stub 0 nssa
  Maximum path: 4
  Routing for Networks:
    172.30.64.32 0.0.0.15 area 0
    172.30.192.48 0.0.0.15 area 0
    172.30.252.0 0.0.0.3 area 0
    172.30.252.144 0.0.0.15 area 0
    172.30.252.160 0.0.0.31 area 0
    172.30.252.192 0.0.0.31 area 0
    172.30.252.224 0.0.0.7 area 0
    172.30.252.232 0.0.0.7 area 0
    192.169.3.20 0.0.0.3 area 0
    192.169.140.0 0.0.0.15 area 0
Reference bandwidth unit is 100 mbps
  Routing Information Sources:
    Gateway         Distance      Last Update
    172.24.86.253        110      1w3d
    172.18.242.8         110      6d20h
    172.30.196.34        110      00:00:05
    172.18.232.8         110      1w5d
    192.169.3.10         110      4d23h
    192.168.4.5          110      00:00:06
    192.168.4.1          110      00:00:06
    192.168.4.2          110      00:00:06
    192.169.21.1         110      00:00:06
    192.169.23.1         110      00:00:06
    172.30.66.17         110      00:00:06
    192.169.140.9        110      00:00:06
    192.169.140.8        110      4w2d
    192.169.140.10       110      00:00:06
    172.30.66.1          110      4d14h
    172.30.66.9          110      7w5d
  Distance: (default is 110)

m9#sh ip ospf int
FastEthernet0/0.4 is up, line protocol is up
  Internet Address 172.30.252.234/29, Area 0
  Process ID 1, Router ID 192.169.140.8, Network Type BROADCAST, Cost: 1
  Transmit Delay is 1 sec, State DR, Priority 1
  Designated Router (ID) 192.169.140.8, Interface address 172.30.252.234
  Backup Designated router (ID) 192.169.140.9, Interface address 172.30.252.233
  Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
    oob-resync timeout 40
    Hello due in 00:00:05
  Supports Link-local Signaling (LLS)
  Cisco NSF helper support enabled
  IETF NSF helper support enabled
  Index 3/4, flood queue length 0
  Next 0x0(0)/0x0(0)
  Last flood scan length is 1, maximum is 14
  Last flood scan time is 0 msec, maximum is 4 msec
  Neighbor Count is 1, Adjacent neighbor count is 1
    Adjacent with neighbor 192.169.140.9  (Backup Designated Router)
  Suppress hello for 0 neighbor(s)
FastEthernet0/1 is up, line protocol is up
  Internet Address 172.30.252.162/29, Area 0
  Process ID 1, Router ID 192.169.140.8, Network Type BROADCAST, Cost: 1
  Transmit Delay is 1 sec, State BDR, Priority 1
  Designated Router (ID) 192.169.140.9, Interface address 172.30.252.161
  Backup Designated router (ID) 192.169.140.8, Interface address 172.30.252.162
  Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
    oob-resync timeout 40
    Hello due in 00:00:08
  Supports Link-local Signaling (LLS)
  Cisco NSF helper support enabled
  IETF NSF helper support enabled
  Index 4/5, flood queue length 0
  Next 0x0(0)/0x0(0)
  Last flood scan length is 1, maximum is 14
  Last flood scan time is 0 msec, maximum is 4 msec
  Neighbor Count is 1, Adjacent neighbor count is 1
    Adjacent with neighbor 192.169.140.9  (Designated Router)
  Suppress hello for 0 neighbor(s)
Serial0/0/0:0 is up, line protocol is up
  Internet Address 192.169.3.21/30, Area 0
  Process ID 1, Router ID 192.169.140.8, Network Type POINT_TO_POINT, Cost: 48
  Transmit Delay is 1 sec, State POINT_TO_POINT
  Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
    oob-resync timeout 40
    Hello due in 00:00:06
  Supports Link-local Signaling (LLS)
  Cisco NSF helper support enabled
  IETF NSF helper support enabled
  Index 6/6, flood queue length 0
  Next 0x0(0)/0x0(0)
  Last flood scan length is 1, maximum is 14
  Last flood scan time is 0 msec, maximum is 4 msec
  Neighbor Count is 1, Adjacent neighbor count is 1
    Adjacent with neighbor 172.30.66.1
  Suppress hello for 0 neighbor(s)
FastEthernet0/0.5 is up, line protocol is up
  Internet Address 172.30.252.154/28, Area 0
  Process ID 1, Router ID 192.169.140.8, Network Type BROADCAST, Cost: 1
  Transmit Delay is 1 sec, State DR, Priority 1
  Designated Router (ID) 192.169.140.8, Interface address 172.30.252.154
  Backup Designated router (ID) 192.169.140.9, Interface address 172.30.252.152
  Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
    oob-resync timeout 40
    Hello due in 00:00:01
  Supports Link-local Signaling (LLS)
  Cisco NSF helper support enabled
  IETF NSF helper support enabled
  Index 5/3, flood queue length 0
  Next 0x0(0)/0x0(0)
  Last flood scan length is 1, maximum is 14
  Last flood scan time is 0 msec, maximum is 4 msec
  Neighbor Count is 1, Adjacent neighbor count is 1
    Adjacent with neighbor 192.169.140.9  (Backup Designated Router)
  Suppress hello for 0 neighbor(s)
FastEthernet0/0.1 is up, line protocol is up
  Internet Address 172.30.192.50/28, Area 0
  Process ID 1, Router ID 192.169.140.8, Network Type BROADCAST, Cost: 1
  Transmit Delay is 1 sec, State BDR, Priority 1
  Designated Router (ID) 192.169.140.9, Interface address 172.30.192.49
  Backup Designated router (ID) 192.169.140.8, Interface address 172.30.192.50
  Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
    oob-resync timeout 40
    Hello due in 00:00:04
  Supports Link-local Signaling (LLS)
  Cisco NSF helper support enabled
  IETF NSF helper support enabled
  Index 2/2, flood queue length 0
  Next 0x0(0)/0x0(0)
  Last flood scan length is 1, maximum is 14
  Last flood scan time is 0 msec, maximum is 4 msec
  Neighbor Count is 1, Adjacent neighbor count is 1
    Adjacent with neighbor 192.169.140.9  (Designated Router)
  Suppress hello for 0 neighbor(s)
FastEthernet0/0.2 is up, line protocol is up
  Internet Address 172.30.64.34/28, Area 0
  Process ID 1, Router ID 192.169.140.8, Network Type BROADCAST, Cost: 1
  Transmit Delay is 1 sec, State BDR, Priority 1
  Designated Router (ID) 192.169.140.9, Interface address 172.30.64.33
  Backup Designated router (ID) 192.169.140.8, Interface address 172.30.64.34
  Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
    oob-resync timeout 40
    Hello due in 00:00:04
  Supports Link-local Signaling (LLS)
  Cisco NSF helper support enabled
  IETF NSF helper support enabled
  Index 1/1, flood queue length 0
  Next 0x0(0)/0x0(0)
  Last flood scan length is 1, maximum is 14
  Last flood scan time is 0 msec, maximum is 4 msec
  Neighbor Count is 1, Adjacent neighbor count is 1
    Adjacent with neighbor 192.169.140.9  (Designated Router)
  Suppress hello for 0 neighbor(s)


m9#deb ip ospf hell

Oct  4 06:17:08.186: OSPF: Rcv hello from 172.30.66.1 area 0 from Serial0/0/0:0 192.169.3.22
Oct  4 06:17:08.186: OSPF: End of hello processing
Oct  4 06:17:08.594: OSPF: Rcv hello from 192.169.140.9 area 0 from FastEthernet0/0.4 172.30.252.233
Oct  4 06:17:08.594: OSPF: End of hello processing
Oct  4 06:17:08.622: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/1 from 172.30.252.162
Oct  4 06:17:11.622: OSPF: Rcv hello from 192.169.140.9 area 0 from FastEthernet0/0.1 172.30.192.49
Oct  4 06:17:11.622: OSPF: End of hello processing
Oct  4 06:17:11.622: OSPF: Rcv hello from 192.169.140.9 area 0 from FastEthernet0/0.2 172.30.64.33
Oct  4 06:17:11.622: OSPF: End of hello processing
Oct  4 06:17:12.202: OSPF: Rcv hello from 192.169.140.9 area 0 from FastEthernet0/0.5 172.30.252.152
Oct  4 06:17:12.202: OSPF: End of hello processing
Oct  4 06:17:12.790: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0.5 from 172.30.252.154
Oct  4 06:17:14.054: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0.4 from 172.30.252.234
Oct  4 06:17:15.262: OSPF: Rcv hello from 192.169.140.9 area 0 from FastEthernet0/1 172.30.252.161
Oct  4 06:17:15.262: OSPF: End of hello processing
Oct  4 06:17:17.086: OSPF: Send hello to 224.0.0.5 area 0 on Serial0/0/0:0 from 192.169.3.21
Oct  4 06:17:17.086: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0.1 from 172.30.192.50
Oct  4 06:17:17.086: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0.2 from 172.30.64.34
Oct  4 06:17:18.002: OSPF: Rcv hello from 172.30.66.1 area 0 from Serial0/0/0:0 192.169.3.22
Oct  4 06:17:18.002: OSPF: End of hello processing
Oct  4 06:17:18.593: OSPF: Rcv hello from 192.169.140.9 area 0 from FastEthernet0/0.4 172.30.252.233
Oct  4 06:17:18.593: OSPF: End of hello processing
Oct  4 06:17:18.621: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/1 from 172.30.252.162
Oct  4 06:17:21.621: OSPF: Rcv hello from 192.169.140.9 area 0 from FastEthernet0/0.1 172.30.192.49
Oct  4 06:17:21.621: OSPF: End of hello processing
Oct  4 06:17:21.621: OSPF: Rcv hello from 192.169.140.9 area 0 from FastEthernet0/0.2 172.30.64.33
Oct  4 06:17:21.621: OSPF: End of hello processing
Oct  4 06:17:22.201: OSPF: Rcv hello from 192.169.140.9 area 0 from FastEthernet0/0.5 172.30.252.152
Oct  4 06:17:22.201: OSPF: End of hello processing
Oct  4 06:17:22.789: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0.5 from 172.30.252.154
Oct  4 06:17:24.053: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0.4 from 172.30.252.234
Oct  4 06:17:25.261: OSPF: Rcv hello from 192.169.140.9 area 0 from FastEthernet0/1 172.30.252.161
Oct  4 06:17:25.261: OSPF: End of hello processing
Oct  4 06:17:27.085: OSPF: Send hello to 224.0.0.5 area 0 on Serial0/0/0:0 from 192.169.3.21
Oct  4 06:17:27.085: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0.1 from 172.30.192.50
Oct  4 06:17:27.085: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0.2 from 172.30.64.34
Oct  4 06:17:27.241: OSPF: Rcv hello from 172.30.66.1 area 0 from Serial0/0/0:0 192.169.3.22
Oct  4 06:17:27.241: OSPF: End of hello processing
Oct  4 06:17:28.593: OSPF: Rcv hello from 192.169.140.9 area 0 from FastEthernet0/0.4 172.30.252.233
Oct  4 06:17:28.597: OSPF: End of hello processing
Oct  4 06:17:28.621: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/1 from 172.30.252.162
Oct  4 06:17:31.624: OSPF: Rcv hello from 192.169.140.9 area 0 from FastEthernet0/0.1 172.30.192.49
Oct  4 06:17:31.624: OSPF: End of hello processing
Oct  4 06:17:31.624: OSPF: Rcv hello from 192.169.140.9 area 0 from FastEthernet0/0.2 172.30.64.33
Oct  4 06:17:31.624: OSPF: End of hello processing
Oct  4 06:17:32.204: OSPF: Rcv hello from 192.169.140.9 area 0 from FastEthernet0/0.5 172.30.252.152
Oct  4 06:17:32.204: OSPF: End of hello processing
Oct  4 06:17:32.788: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0.5 from 172.30.252.154

 

Ваше сообщение
Имя*:
EMail:
Для отправки новых сообщений в текущей нити на email укажите знак ! перед адресом, например, !user@host.ru (!! - не показывать email).
Более тонкая настройка отправки ответов производится в профиле зарегистрированного участника форума.
Заголовок*:
Сообщение*:
 
При общении не допускается: неуважительное отношение к собеседнику, хамство, унизительное обращение, ненормативная лексика, переход на личности, агрессивное поведение, обесценивание собеседника, провоцирование флейма голословными и заведомо ложными заявлениями. Не отвечайте на сообщения, явно нарушающие правила - удаляются не только сами нарушения, но и все ответы на них. Лог модерирования.



Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру