Исходное сообщение
"Настроить cisco 871 на 2а канала" Отправлено madleg, 12-Дек-07 08:37
>а ты NAT настроил на второй канал? ДА ! ! spanning-tree portfast bpduguard spanning-tree uplinkfast track 10 rtr 10 reachability delay down 15 up 15 ! track 11 interface FastEthernet4 ip routing delay down 10 up 10 ! track 12 list boolean and object 10 object 11 ! track 20 list boolean and object 12 not ! no crypto xauth FastEthernet1 no crypto xauth FastEthernet4 ! ! ! ! interface Loopback0 ip address 10.0.3.254 255.255.255.0 ! interface FastEthernet0 description Intrnal LAN ! interface FastEthernet1 switchport access vlan 2 ! interface FastEthernet2 !         interface FastEthernet3 ! interface FastEthernet4 ip address 192.168.50.30 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat outside ip virtual-reassembly ip route-cache flow no ip mroute-cache duplex auto speed auto timeout absolute 40 0 no snmp trap link-status no cdp enable ! interface Vlan1 description internal LAN ip address 10.100.8.254 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat inside ip virtual-reassembly ip route-cache flow ip tcp adjust-mss 1452 no ip mroute-cache hold-queue 32 in ! interface Vlan2 description  second ip address 89.*.*.* 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat outside ip virtual-reassembly ip route-cache flow ip tcp adjust-mss 1452 no ip mroute-cache timeout absolute 40 0 no snmp trap link-status ! ! ip route 0.0.0.0 0.0.0.0 89.*.*.1 track 10 ip route 0.0.0.0 0.0.0.0 192.168.50.29 track 12 ip route 10.100.0.0 255.255.0.0 192.168.50.29 ip route 192.168.50.0 255.255.255.252 192.168.50.29 ! ! ! ip prefix-list 10 seq 5 permit 0.0.0.0/0 ! ip prefix-list 20 seq 5 permit 0.0.0.0/0 ip sla 10 icmp-echo 194.*.*.* source-interface Vlan10 ip sla schedule 10 life forever start-time now ! ! ! route-map NAT-vtoroy permit 10 match ip address NAT_IP match ip next-hop vtoroy match interface Vlan10 ! route-map redistribure_connected permit 10 match ip address prefix-list 20 ! route-map redistribure_connected permit 20 match ip address prefix-list 10 ! route-map PBR permit 10 match ip address NAT_IP set ip next-hop verify-availability 89.*.*.1 1 track 12 set ip next-hop verify-availability 192.168.50.29 2 track 20 set ip df 0 ! route-map NAT-perviy permit 10 match ip address NAT_IP match ip next-hop perviy match interface FastEthernet4 ! ! Жду с надеждой советов, и что тут верно и не верно! Хочу чтоб припадении одного канала работал второй!